What if you were given a system of linear equations like and ? How could you solve for one of the variables by eliminating the other? After completing this Concept, you'll be able to solve a system of linear equations by multiplication and then elimination.
Watch This
CK-12 Foundation: 0705S Solving Linear Systems by Elimination and Multiplication (H264)
Guidance
So far, we’ve seen that the elimination method works well when the coefficient of one variable happens to be the same (or opposite) in the two equations. But what if the two equations don’t have any coefficients the same?
It turns out that we can still use the elimination method; we just have to make one of the coefficients match. We can accomplish this by multiplying one or both of the equations by a constant.
Here’s a quick review of how to do that. Consider the following questions:
- If 10 apples cost $5, how much would 30 apples cost?
- If 3 bananas plus 2 carrots cost $4, how mush would 6 bananas plus 4 carrots cost?
If you look at the first equation, it should be obvious that each apple costs $0.50. So 30 apples should cost $15.00.
The second equation is trickier; it isn’t obvious what the individual price for either bananas or carrots is. Yet we know that the answer to question 2 is $8.00. How?
If we look again at question 1, we see that we can write an equation: ( being the cost of 1 apple). So to find the cost of 30 apples, we could solve for and then multiply by 30—but we could also just multiply both sides of the equation by 3. We would get , and that tells us that 30 apples cost $15.
And we can do the same thing with the second question. The equation for this situation is , and we can see that we need to solve for , which is simply 2 times ! So algebraically, we are simply multiplying the entire equation by 2:
So when we multiply an equation, all we are doing is multiplying every term in the equation by a fixed amount.
Solving a Linear System by Multiplying One Equation
If we can multiply every term in an equation by a fixed number (a scalar ), that means we can use the addition method on a whole new set of linear systems. We can manipulate the equations in a system to ensure that the coefficients of one of the variables match.
This is easiest to do when the coefficient as a variable in one equation is a multiple of the coefficient in the other equation.
Example A
Solve the system:
Solution
You can easily see that if we multiply the second equation by 2, the coefficients of will be +4 and -4, allowing us to solve the system by addition:
2 times equation 2:
Now simply substitute this value for back into equation 1:
Example B
Anne is rowing her boat along a river. Rowing downstream, it takes her 2 minutes to cover 400 yards. Rowing upstream, it takes her 8 minutes to travel the same 400 yards. If she was rowing equally hard in both directions, calculate, in yards per minute, the speed of the river and the speed Anne would travel in calm water.
Solution
Step one: first we convert our problem into equations. We know that distance traveled is equal to speed time . We have two unknowns, so we’ll call the speed of the river , and the speed that Anne rows at . When traveling downstream, her total speed is her rowing speed plus the speed of the river, or . Going upstream, her speed is hindered by the speed of the river, so her speed upstream is .
Downstream Equation:
Upstream Equation:
Distributing gives us the following system:
Right now, we can’t use the method of elimination because none of the coefficients match. But if we multiplied the top equation by 4, the coefficients of would be +8 and -8. Let’s do that:
Now we divide by 16 to obtain .
Substitute this value back into the first equation:
Anne rows at 125 yards per minute, and the river flows at 75 yards per minute.
Solving a Linear System by Multiplying Both Equations
So what do we do if none of the coefficients match and none of them are simple multiples of each other? We do the same thing we do when we’re adding fractions whose denominators aren’t simple multiples of each other. Remember that when we add fractions, we have to find a lowest common denominator —that is, the lowest common multiple of the two denominators—and sometimes we have to rewrite not just one, but both fractions to get them to have a common denominator. Similarly, sometimes we have to multiply both equations by different constants in order to get one of the coefficients to match.
Example C
Andrew and Anne both use the I-Haul truck rental company to move their belongings from home to the dorm rooms on the University of Chicago campus. I-Haul has a charge per day and an additional charge per mile. Andrew travels from San Diego, California, a distance of 2060 miles in five days. Anne travels 880 miles from Norfolk, Virginia, and it takes her three days. If Anne pays $840 and Andrew pays $1845, what does I-Haul charge
a) per day?
b) per mile traveled?
Solution
First, we’ll set up our equations. Again we have 2 unknowns: the daily rate (we’ll call this ), and the per-mile rate (we’ll call this ).
Anne’s equation:
Andrew’s Equation:
We can’t just multiply a single equation by an integer number in order to arrive at matching coefficients. But if we look at the coefficients of (as they are easier to deal with than the coefficients of ), we see that they both have a common multiple of 15 (in fact 15 is the lowest common multiple ). So we can multiply both equations.
Multiply the top equation by 5:
Multiply the lower equation by 3:
Subtract:
Substitute this back into the top equation:
I-Haul charges $60 per day plus $0.75 per mile.
Watch this video for help with the Examples above.
CK-12 Foundation: Linear Systems by Elimination and Multiplication
Vocabulary
- Elimination method: The purpose of the elimination method to solve a system is to cancel, or eliminate, a variable by either adding or subtracting the two equations. Sometimes the equations must be multiplied by scalars first, in order to cancel out a variable.
- Least common multiple: The least common multiple is the smallest value that is divisible by two or more quantities without a remainder .
Guided Practice
Solve the system .
Solution:
Neither nor have additive inverse coefficients, but the -variables do share a common factor of 2. Thus we can most easily eliminate .
In order to make have the same coefficient in each equation, we must multiply one equation by the factor not shared in the coefficient of in the other equation. We need to multiply the first equation by 3 and the second equation by 2, making one of them negative as well:
To find the value, use the Substitution Property in either equation.
The solution to this system is .
Practice
Solve the following systems using multiplication.