Ken is having a disagreement with his friend Scott. Scott says that the track that they run on at school is not really an ellipse, but an oval. Ken thinks that is a silly distinction, since ovals and ellipses are the same thing. Who is correct?
Watch This
Embedded Video:
- James Sousa: Conic Sections: The Ellipse part 1
Guidance
When a plane "slices through" one side of a cone, we get either a circle or an “oval-shaped” object as shown below. It turns out that this is no ordinary oval, but something called an ellipse , a shape with special properties.
a. Cone "sliced through" by a plane 90 ^{ o } to the axis of the cone to form a circle . | b. Cone "sliced through" by a plane at an angle to form an ellipse . |
---|
Ellipses can be defined by some of their properties. One way to define an ellipse is as a “stretched out circle”. It’s the shape you would get if you sketched a circle on a deflated balloon and then stretched out the balloon evenly in two opposite directions:
It’s also the shape of the surface of water that results when you tilt a round glass:
Or an ellipse could be thought of as the shape of a circle drawn on a piece of paper when it is viewed at an angle.
Equations of Ellipses
This “stretching” can be represented algebraically. For simplicity, take the circle of radius 1 centered at the origin (0,0). The distance formula tells us that this is the set of points that is a distance 1 unit away from the origin.
This equation, , can be altered to stretch the circle in the horizontal (i.e. axis) direction by dividing the variable by a constant ,
Why does this stretch the circle horizontally? Well, the effect of dividing by is that for each value in an ordered pair that satisfies the original equation, the corresponding value must be multiplied by in order for the pair to make a solution to the altered equation. So solutions of the circle are in one-to-one correspondence with solutions of the altered equation, hence stretching the corresponding graph to the left and right by a factor of .
Here is the graph of :
Generalizing the equation by allowing a stretch in the vertical direction, we get the following.
The factor stretches the circle in the horizontal direction and the factor stretches the circle in the vertical direction. If , this is just a circle. When , this equation represents an ellipse. The ellipse is stretched in the horizontal direction if and it is stretched in the vertical direction if .
Often the above equation is written as follows.
This is called the standard form of the equation of an ellipse, assuming that the ellipse is centered at (0,0).
To sketch a graph of an ellipse with the equation , start by plotting the four axes intercepts, which are easy to find by plugging in 0 for and then for . Then sketch the ellipse freehand, or with a graphing program or calculator.
The Foci
In every ellipse there are two special points called the foci (foci is plural, focus is singular), which lie inside the ellipse and which can be used to define the shape. For an ellipse centered at (0,0) that is wider than it is tall, its major axis is horizontal and its foci are at and .
What is the significance of these points? Ellipses relate to these points much as a circle relates to its center. Remember a circle can be thought of as the set of points in a plane that are a certain distance from the center point, in fact, that is typically the definition of a circle. Well, the foci act like the center except that there are two of them. An ellipse is the set of points where the sum of the distance between each point on the ellipse and each of the two foci is a constant number. In the diagram below, for any point on the ellipse, , where and are the foci and is a constant.
Example A
Sketch the graph of .
Solution
This equation can be rewritten as
- To sketch, we set and solve for to find the x-intercepts and
- set and solve for to find the intercepts
- The four points we get are: (0,3), (0,-3), (2,0), and (-2,0)
- Plot those points and sketch the ellipse:
Example B
Sketch the graph of .
Solution
This can be rewritten as After finding the intercepts and sketching the graph with the same process as above, we have:
The segment spanning the long direction of the ellipse is called the major axis , and the segment spanning the short direction of the ellipse is called the minor axis . So in the last example the major axis is the segment from (-4,0) to (4,0) and the minor axis is the segment from (0,-1) to (0,1).
The major and minor axes are examples of what are sometimes called reference lines . Apollonius, the Ancient Greek mathematician who wrote an early treatise on conics, used these and other reference lines to orient conic sections. Though the Greeks did not use a coordinate plane to discuss geometry, these reference lines offer a framing perspective that is similar to the Cartesian plane that we use today. Apollonius’ way of framing conics with reference lines was the closest mathematics came to the system of coordinate geometry that you know so well until Descartes’ and Fermat’s systematic work in the seventeenth century.
Example C
What is the full range of the eccentricity of an ellipse? What does it look like near the extremes of this range?
Solution
Foci can be used to measure how far an ellipse is “stretched” from a circle. The symbol stands for the eccentricity of an ellipse, and it is defined by the distance between the foci divided by the length of the major axis, or for horizontally oriented ellipses and for vertically oriented ellipses. Since a circle is an ellipse where , circles have an eccentricity of 0.
The interval of possible values is . At , the ellipse is a circle; as the eccentricity approaches 1 it becomes more and more elongated.
Concept question wrap-up Scott is, of course, correct. Ovals are not the same as ellipses. |
---|
Vocabulary
Foci is the plural of focus , and is the term used to describe the points used to draw an ellipse.
An ellipse is the location of all points that total a given distance from one focus along a straight line to a point, then back to the other focus.
Eccentricity is a measure of how "squashed" an ellipse is, is a value between 0 (which describes a circle) and 1.
Guided Practice
Questions
1) Not all equations for ellipses start off in the standard form above. For example, is an ellipse. Put it in the proper form and graph it.
2) It was mentioned above that when a round glass of water is tilted, the surface of the water is an ellipse. Using our working definition of an ellipse as “stretched out circle”, explain why you think the water takes this shape.
3) Sketch the following ellipse:
4) Now try sketching this ellipse where the numbers don’t turn out to be so neat:
Solutions
1) To graph as the ellipse it is:
- ..... First, divide both sides by 225
- ..... Find the intercepts
Graphing, we have:
2) Answers may vary, but should explain why the shape that results stretches a circle in one direction because the width of the glass is constant.
3) To graph
- ..... First, divide both sides by 900
- ..... Find the intercepts
Graphing:
4) To graph
- ..... First, divide both sides by 12
- ..... Find the intercepts
Graphing, we get:
Practice
Convert the equations to standard form of an ellipse.
Graph the following equations of an ellipse