Suppose that you own a house and that a termite problem has forced you to call the exterminator. The exterminator asks you about the problem, and you say, "Each day for the past week I counted the number of termites, and there were 5, 10, 20, 40, 80, 160, and 320, respectively." How many termites would you expect to count next?
Geometric Sequences and Exponential Functions
Which would you prefer: being given one million dollars, or one penny the first day, double that penny the next day, and then double the previous day's pennies and so on for a month?
At first glance you would think that a million dollars would be more. However, let’s check the values of the pennies before we decide to see how the pennies add up. You start with a penny the first day and keep doubling each day until the end of the month (30 days).
1st Day2nd Day3rd Day4th Day30th Day1 penny2 pennies4 pennies8 pennies=20=21=22=23=229
229=536,870,912 pennies or $5,368,709.12, which is well over five times greater than $1,000,000.00.
This is an example of a geometric sequence. A geometric sequence is a sequence(list) of numbers in which each number in the sequence is found by multiplying the previous number by a fixed amount called the common ratio.
To find the nth term in a geometric sequence, you can use the formula an=a1rn−1 (a1= first term, r= common ratio)
The Common Ratio of a Geometric Sequence
The common ratio, r, in any geometric sequence can be found by dividing any term by the preceding term. If we know the common ratio in a sequence then we can find any term in the sequence.
Let's find the eighth term in the following geometric sequence:
1, 2, 4,...
First we need to find the common ratio: r=21=2.
The eighth term is given by the formula 2=1⋅27=128.
In other words, to get the eighth term we started with the first term, which is 1, and multiplied by two seven times.
Graphing Geometric Sequences
Exponential graphs and geometric sequence graphs look very much alike. Exponential graphs are continuous, however, and the sequence graphs are discrete with distinct points (1st term and 2nd term, etc).
Suppose a population of bacteria in a Petri dish increases by a factor of three every 24 hours. The starting population is 1 million bacteria. This means that on the first day the population increases to 3 million, on the second day to 9 million, and so on.
The population of bacteria is continuous. Even though we measured the population only every 24 hours, we know that it does not get from 1 million to 3 million all at once. Rather, the population changes bit by bit over the 24 hours. In other words, the bacteria are always there, and you can, if you so wish, find out what the population is at any time during a 24-hour period.
When we graph an exponential function, we draw the graph with a solid curve to show the function has values at any time during the day. On the other hand, when we graph a geometric sequence, we draw discrete points to show the sequence has values only at those points but not in-between.
Here are graphs for the bacteria example and an example where the blocks in a stack start at 3 and triple as the stack number increases:
Let's solve the following problem:
A courtier presented the Indian king with a beautiful, hand-made chessboard. The king asked what he would like in return for his gift and the courtier surprised the king by asking for one grain of rice on the first square, two grains on the second, four grains on the third, etc. The king readily agreed and asked for the rice to be brought (from Meadows et al. 1972, p.29 via Porritt 2005). How many grains of rice does the king have to put on the last square?
A chessboard is an 8×8 square grid, so it contains a total of 64 squares.
The courtier asked for one grain of rice on the first square, 2 grains of rice on the second square, 4 grains of rice on the third square and so on. We can write this as a geometric sequence.
1, 2, 4,...
The numbers double each time, so the common ratio is r=2.
The problem asks how many grains of rice the king needs to put on the last square. What we need to find is the 64th term in the sequence. This means multiplying the starting term, 1, by the common ratio 64 times in a row. Let’s use the formula.
an=a1rn−1, where an is the nth term, a1 Is the first term and r is the common ratio.
a64=1⋅263=9,223,372,036,854,775,808 grains of rice.
Earlier, you were told that each day you counted the number of termites in your home and there were 5, 10, 20, 40, 80, 160, and 320 respectively. How many termites would you expect to count next?
Let's check the ratio between the numbers and determine if there is a common ratio:
Clearly there is a common ratio of 2 and this is a geometric sequence. To find the next value in the sequence, multiply the last term by the common ratio, 2.
The next day, you would expect to count 640 termites.
Find the next number in the geometric sequence: 0.01 , 0.06 , 0.36 , 2.16 , 12.96 , ...
The common ratio is:
Since the first value in the sequence is 0.01, the geometric sequence is
and since we are looking for the 6th term
The next number in the sequence is 77.76.
- Define a geometric sequence.
- Using the chessboard example, how many grains of rice should be placed on the:
- Fourth square?
- Tenth square?
- Twenty-fifth square?
- 60th square?
- Is the following an example of a geometric sequence? Explain your answer. –1, 1, –1, 1, –1, ...
- Use the Petri dish example from the Concept. At what time are 25,000 bacteria in the dish?
Determine the constant ratio, r, for each geometric sequence.
- 8, 6,...
- 2, 4, 8, 16,...
- 2, –8, 32, –128
Determine the first five terms of each geometric sequence.
Find the missing terms in each geometric sequence.
- 3, ____, 48, 192, ____
- 81, ____, ____, ____, 1
- 94, ____, ____, 23, ____
Find the indicated term of each geometric sequence.
- a1=4,r=2 Find a6.
- a1=−7,r=−34 Find a4.
- a1=−10,r=−3 Find a10.
- A ball is tossed from a height of four feet. Each bounce is 80% as high as the previous bounce.
- Write an equation to represent the situation.
- How high is the ball after the fifth bounce?
- An ant walks past several stacks of Lego blocks. There is one block in the first stack, three blocks in the second stack, and nine blocks in the third stack. In fact, in each successive stack there are triple the number of blocks there were in the previous stack.
- How many blocks are in the eighth stack?
- When is the stack 343 blocks high?
- A super-ball has a 75% rebound ratio. When you drop it from a height of 20 feet, it bounces and bounces and bounces...
- How high does the ball bounce after it strikes the ground for the third time?
- How high does the ball bounce after it strikes the ground for the seventeenth time?
- Anne goes bungee jumping off a bridge above water. On the initial jump, the bungee cord stretches by 120 feet. On the next bounce, the stretch is 60% of the original jump and each additional bounce stretches the rope by 60% of the previous stretch.
- What will the rope stretch be on the third bounce?
- What will the rope stretch be on the 12th bounce?
- A virus population doubles every 30 minutes. It begins with a population of 30.
- How many viral cells will be present after 5 hours?
- When will it reach 1,000,000 cells? Round to the nearest half-hour.
- Translate into an algebraic sentence: A number squared is less than 15 more than twice that number.
- Give the slope and y−intercept of y=23x−7.
- Evaluate 10!.
- Convert 6 miles to yards.
- Simplify 5y2−3y24y11.
- Simplify 3x2⋅x6+4x3x5.
- Evaluate (2764)−13.
To see the Review answers, open this PDF file and look for section 8.9.