# 5.3: Grouped Data to Find the Mean

Difficulty Level: At Grade Created by: CK-12
Estimated12 minsto complete
%
Progress
Practice Grouped Data to Find the Mean

MEMORY METER
This indicates how strong in your memory this concept is
Progress
Estimated12 minsto complete
%
Estimated12 minsto complete
%
MEMORY METER
This indicates how strong in your memory this concept is

On a timed math test, students solved a particular problem at different rates of time. Five students solved the problem within 1-3 minutes, six of them solved it within 4-6 minutes, ten of them solved it within 7-9 minutes, and three of them solved it within 10-12 minutes. How could you organize this data into a frequency distribution table and find out the average time it took to solve this problem?

### Watch This

First watch this video to learn about finding the mean of grouped data.

Then watch this video to see some examples.

### Guidance

All of the values for the means that you have calculated so far have been for ungrouped, or listed, data. A mean can also be determined for grouped data, or data that is placed in intervals. Unlike listed data, the individual values for grouped data are not available, and you are not able to calculate their sum. To calculate the mean of grouped data, the first step is to determine the midpoint of each interval, or class. These midpoints must then be multiplied by the frequencies of the corresponding classes. The sum of the products divided by the total number of values will be the value of the mean.

In other words, the mean for a population can be found by dividing \begin{align*}\sum mf\end{align*} by \begin{align*}N\end{align*}, where \begin{align*}m\end{align*} is the midpoint of the class and \begin{align*}f\end{align*} is the frequency. As a result, the formula \begin{align*}\mu=\frac{\sum mf}{N}\end{align*} can be written to summarize the steps used to determine the value of the mean for a set of grouped data. If the set of data represented a sample instead of a population, the process would remain the same, and the formula would be written as \begin{align*}\overline{x}=\frac{\sum mf}{n}\end{align*}.

The following examples will show how the mean value for grouped data can be calculated.

#### Example A

In Tim's school, there are 25 teachers. Each teacher travels to school every morning in his or her own car. The distribution of the driving times (in minutes) from home to school for the teachers is shown in the table below:

Driving Times (minutes) Number of Teachers
0 to less than 10 3
10 to less than 20 10
20 to less than 30 6
30 to less than 40 4
40 to less than 50 2

The driving times are given for all 25 teachers, so the data is for a population. Calculate the mean of the driving times.

Step 1: Determine the midpoint for each interval.

For 0 to less than 10, the midpoint is 5.

For 10 to less than 20, the midpoint is 15.

For 20 to less than 30, the midpoint is 25.

For 30 to less than 40, the midpoint is 35.

For 40 to less than 50, the midpoint is 45.

Step 2: Multiply each midpoint by the frequency for the class.

For 0 to less than 10, \begin{align*}(5)(3) = 15\end{align*}

For 10 to less than 20, \begin{align*}(15)(10) = 150\end{align*}

For 20 to less than 30, \begin{align*}(25)(6) = 150\end{align*}

For 30 to less than 40, \begin{align*}(35)(4) = 140\end{align*}

For 40 to less than 50, \begin{align*}(45)(2) = 90\end{align*}

Step 3: Add the results from Step 2 and divide the sum by 25.

\begin{align*}15+150+150+140+90 &= 545\\ \mu &= \frac{545}{25}=21.8\end{align*}

Each teacher spends a mean time of 21.8 minutes driving from home to school each morning.

To better represent the problem and its solution, a table can be drawn as follows:

Driving Times (minutes) Number of Teachers \begin{align*}f\end{align*} Midpoint Of Class \begin{align*}m\end{align*} Product \begin{align*}mf\end{align*}
0 to less than 10 3 5 15
10 to less than 20 10 15 150
20 to less than 30 6 25 150
30 to less than 40 4 35 140
40 to less than 50 2 45 90

For the population, \begin{align*}N = 25\end{align*} and \begin{align*}\sum mf=545\end{align*}, so using the formula \begin{align*}\mu=\frac{\sum mf}{N}\end{align*}, the mean would again be \begin{align*}\mu=\frac{545}{25}=21.8\end{align*}.

#### Example B

In Example A, suppose the distribution of driving times were broken down into smaller intervals as shown:

Driving Times (minutes) Number of Teachers
0 to less than 5 2
5 to less than 10 1
10 to less than 15 4
15 to less than 20 6
20 to less than 25 3
25 to less than 30 3
30 to less than 35 1
35 to less than 40 3
40 to less than 45 1
45 to less than 50 1

Calculate the mean of the driving times.

First create the table below:

Driving Times (minutes) Number of Teachers \begin{align*}f\end{align*} Midpoint Of Class \begin{align*}m\end{align*} Product \begin{align*}mf\end{align*}
0 to less than 5 2 2.5 5.0
5 to less than 10 1 7.5 7.5
10 to less than 15 4 12.5 50.0
15 to less than 20 6 17.5 105.0
20 to less than 25 3 22.5 67.5
25 to less than 30 3 27.5 82.5
30 to less than 35 1 32.5 32.5
35 to less than 40 3 37.5 112.5
40 to less than 45 1 42.5 42.5
45 to less than 50 1 47.5 47.5

Now the mean can be calculated as shown:

\begin{align*}\mu &= \frac{\sum mf}{N}\\ \mu &= \frac{5.0+7.5+50.0+105.0+67.5+82.5+32.5+112.5+42.5+47.5}{25}\\ \mu &= \frac{552.5}{25}\\ \mu &= 22.1\end{align*}

This time, the mean time spent by each teacher driving from home to school is 22.1 minutes. Thus, the mean for grouped data can change based on the size of the intervals.

#### Example C

The ages of 100 singers of a 360-member choir are shown in the table below:

Ages of Members (years) Number of Members
20 to less than 25 12
25 to less than 30 14
30 to less than 35 10
35 to less than 40 8
40 to less than 45 20
45 to less than 50 6
50 to less than 55 5
55 to less than 60 4
60 to less than 65 11
65 to less than 70 10

Calculate the mean of the ages.

First create the table below:

Ages of Members (years) Number of Members \begin{align*}f\end{align*} Midpoint Of Class \begin{align*}m\end{align*} Product \begin{align*}mf\end{align*}
20 to less than 25 12 22.5 270.0
25 to less than 30 14 27.5 385.0
30 to less than 35 10 32.5 325.0
35 to less than 40 8 37.5 300.0
40 to less than 45 20 42.5 850.0
45 to less than 50 6 47.5 285.0
50 to less than 55 5 52.5 262.5
55 to less than 60 4 57.5 230.0
60 to less than 65 11 62.5 687.5
65 to less than 70 10 67.5 675.0

Since the ages represent a sample, the mean can be calculated as shown:

\begin{align*}\overline{x} &= \frac{\sum mf}{n}\\ \overline{x} &= \frac{270.0+385.0+325.0+300.0+850.0+285.0+262.5+230.0+687.5+675.0}{100}\\ \overline{x} &= \frac{4,270.0}{100}\\ \overline{x} &= 42.7\end{align*}

The mean age of the 100 members of the choir is 42.7 years.

Points to Consider

• Is the mean only used as a measure of central tendency, or is it applied to other representations of data?
• If the mean is applied to other representations of data, can its value be calculated or estimated from this representation?
• What other measures of central tendency can be used as a statistical summary when the mean is not the best measure to use?

### Guided Practice

The following table shows the frequency distribution of the number of hours spent per week texting messages on a cell phone by 60 grade 10 students at a local high school.

Time Per Week (Hours) Number of Students
0 to less than 5 8
5 to less than 10 11
10 to less than 15 15
15 to less than 20 12
20 to less than 25 9
25 to less than 30 5

Calculate the mean number of hours per week spent by each student texting messages on a cell phone. Hint: A table may be useful.

First create the table below.

Time Per Week (Hours) Number of Students \begin{align*}f\end{align*} Midpoint of Class \begin{align*}m\end{align*} Product \begin{align*}mf\end{align*}
0 to less than 5 8 2.5 20.0
5 to less than 10 11 7.5 82.5
10 to less than 15 15 12.5 187.5
15 to less than 20 12 17.5 210.0
20 to less than 25 9 22.5 202.5
25 to less than 30 5 27.5 137.5

Now that you have created several distribution tables for grouped data, it's time to point out that the first column of the table can be represented in another way. As an alternative to writing the interval, or class, in words, the words can be expressed as [# - #), where the front square bracket closes the class, so the first number is included in the designated interval, but the open bracket at the end does not close the class, so the last number is not included in the designated interval. Keeping this in mind, the table above can be presented as follows:

Time Per Week (Hours) Number of Students \begin{align*}f\end{align*} Midpoint of Class \begin{align*}m\end{align*} Product \begin{align*}mf\end{align*}
\begin{align*}[0-5)\end{align*} 8 2.5 20.0
\begin{align*}[5-10)\end{align*} 11 7.5 82.5
\begin{align*}[10-15)\end{align*} 15 12.5 187.5
\begin{align*}[15-20)\end{align*} 12 17.5 210.0
\begin{align*}[20-25)\end{align*} 9 22.5 202.5
\begin{align*}[25-30)\end{align*} 5 27.5 137.5

Now the mean can be calculated as shown:

\begin{align*}\overline{x} &= \frac{\sum mf}{n}\\ \overline{x} &= \frac{20.0+82.5+187.5+210.0+202.5+137.5}{60}\\ \overline{x} &= \frac{840}{60}\\ \overline{x} &= 14\end{align*}

The mean time spent per week by each student texting messages on a cell phone is 14 hours.

### Practice

1. Match the words in the left column with the correct symbol from the right column.

The following table of grouped data represents the weights (in pounds) of all 100 babies born at a local hospital last year.

Weight (pounds) Number of Babies
\begin{align*}[3 - 5)\end{align*} 8
\begin{align*}[5 - 7)\end{align*} 25
\begin{align*}[7 - 9)\end{align*} 45
\begin{align*}[9 - 11)\end{align*} 18
\begin{align*}[11 - 13)\end{align*} 4
1. What is the summation of the values of mf for each class?
2. What is the value of N?
3. Calculate the mean weight for a baby.

The following table of grouped data represents the ages (in years) of 50 of the 500 teachers in a school district.

Age (years) Number of Teachers
\begin{align*}[25 - 35)\end{align*} 7
\begin{align*}[35 - 45)\end{align*} 8
\begin{align*}[45 - 55)\end{align*} 16
\begin{align*}[55 - 65)\end{align*} 10
\begin{align*}[65 - 75)\end{align*} 9
1. What is the summation of the values of mf for each class?
2. What is the value of n?
3. Calculate the mean age for a teacher.

The following table of grouped data represents the numbers of miles on all 25 cars in a used car lot.

Mileage Number of Cars
\begin{align*}[0 - 40,000)\end{align*} 3
\begin{align*}[40,000 - 80,000)\end{align*} 6
\begin{align*}[80,000 - 120,000)\end{align*} 10
\begin{align*}[120,000 - 160,000)\end{align*} 4
\begin{align*}[160,000 - 200,000)\end{align*} 2
1. What is the summation of the values of mf for each class?
2. What is the value of N?
3. Calculate the mean number of miles on a car.

### Notes/Highlights Having trouble? Report an issue.

Color Highlighted Text Notes

### Vocabulary Language: English

TermDefinition
grouped data Grouped data is data that is placed in intervals.

Show Hide Details
Description
Difficulty Level:
Authors:
Tags:
Subjects: