What if your family were ready to fill the new pool with water and they didn't know how much water would be needed? The shallow end is 4 ft. and the deep end is 8 ft. The pool is 10 ft. wide by 25 ft. long. How many gallons of water will it take to fill the pool? There are approximately 7.48 gallons in a cubic foot. After completing this Concept, you'll be able to answer this question.
CK-12 Foundation: Chapter11PrismsA
Brightstorm: Surface Area of Prisms
Brightstorm: Volume of Prisms
A prism is a 3-dimensional figure with 2 congruent bases, in parallel planes with rectangular lateral faces. The edges between the lateral faces are called lateral edges. All prisms are named by their bases, so the prism below is a pentagonal prism.
This particular prism is called a right prism because the lateral faces are perpendicular to the bases. Oblique prisms lean to one side or the other and the height is outside the prism.
Surface area is the sum of the areas of the faces of a solid.
Surface Area of a Right Prism: The surface area of a right prism is the sum of the area of the bases and the area of each rectangular lateral face.
Volume is the measure of how much space a three-dimensional figure occupies. The basic unit of volume is the cubic unit: cubic centimeter , cubic inch , cubic meter , cubic foot , etc. Each basic cubic unit has a measure of one for each: length, width, and height.
Volume of a Rectangular Prism: If a rectangular prism is units high, units wide, and units long, then its volume is .
If we further analyze the formula for the volume of a rectangular prism, we would see that is equal to the area of the base of the prism, a rectangle. If the bases are not rectangles, this would still be true, however we would have to rewrite the equation a little.
Volume of a Prism: If the area of the base of a prism is and the height is , then the volume is .
Recall that earlier in this Concept we talked about oblique prisms. These are prisms that lean to one side and the height is outside the prism. What would be the area of an oblique prism? To answer this question, we need to introduce Cavalieri’s Principle.
Cavalieri’s Principle: If two solids have the same height and the same cross-sectional area at every level, then they will have the same volume.
Basically, if an oblique prism and a right prism have the same base area and height, then they will have the same volume.
Find the surface area of the prism below.
Open up the prism and draw the net. Determine the measurements for each rectangle in the net.
Using the net, we have:
Because this is still area, the units are squared.
Find the surface area of the prism below.
This is a right triangular prism. To find the surface area, we need to find the length of the hypotenuse of the base because it is the width of one of the lateral faces. Using the Pythagorean Theorem, the hypotenuse is
Looking at the net, the surface area is:
A typical shoe box is 8 in by 14 in by 6 in. What is the volume of the box?
We can assume that a shoe box is a rectangular prism. Therefore, we can use the formula above.
You have a small, triangular prism shaped tent. How much volume does it have, once it is set up?
First, we need to find the area of the base. That is going to be . Multiplying this by 7 we would get the entire volume. The volume is .
Even though the height in this problem does not look like a “height,” it is, when referencing the formula. Usually, the height of a prism is going to be the last length you need to use.
Watch this video for help with the Examples above.
CK-12 Foundation: Chapter11PrismsB
Concept Problem Revisited
Even though it doesn’t look like it, the trapezoid is considered the base of this prism. The area of the trapezoids are . Multiply this by the height, 10 ft, and we have that the volume is . To determine the number of gallons that are needed, divide 1500 by 7.48. gallons are needed to fill the pool.
A prism is a 3-dimensional figure with 2 congruent bases, in parallel planes, and in which the other faces are rectangles.
The non-base faces are lateral faces. The edges between the lateral faces are lateral edges. A right prism is a prism where all the lateral faces are perpendicular to the bases. An oblique prism is a prism that leans to one side and whose height is perpendicular to the base’s plane.
Surface area is a two-dimensional measurement that is the sum of the area of the faces of a solid. Volume is a three-dimensional measurement that is a measure of how much three-dimensional space a solid occupies.
1. Find the surface area of the regular pentagonal prism.
2. Find the volume of the right rectangular prism below.
3. Find the volume of the regular hexagonal prism below.
4. Find the area of the oblique prism below.
1. For this prism, each lateral face has an area of . Then, we need to find the area of the regular pentagonal bases. Recall that the area of a regular polygon is . and , so we need to find , the apothem.
2. A rectangular prism can be made from any square cubes. To find the volume, we would simply count the cubes. The bottom layer has 20 cubes, or 4 times 5, and there are 3 layers, or the same as the height. Therefore there are 60 cubes in this prism and the volume would be .
3. Recall that a regular hexagon is divided up into six equilateral triangles. The height of one of those triangles would be the apothem. If each side is 6, then half of that is 3 and half of an equilateral triangle is a 30-60-90 triangle. Therefore, the apothem is going to be . The area of the base is:
And the volume will be:
4. This is an oblique right trapezoidal prism. First, find the area of the trapezoid.
Then, multiply this by the height.
Use the right triangular prism to answer questions 1-5.
- What shape are the bases of this prism? What are their areas?
- What are the dimensions of each of the lateral faces? What are their areas?
- Find the lateral surface area of the prism.
- Find the total surface area of the prism.
- Find the total volume of the prism.
Writing Describe the difference between lateral surface area and total surface area.
- Fuzzy dice are cubes with 4 inch sides.
- What is the surface area of one die?
- Typically, the dice are sold in pairs. What is the surface area of two dice?
- What is the volume of both dice?
Find the surface area and volume of the following solids.
- bases are isosceles trapezoids
Find the value of , given the surface area.
Use the diagram below for questions 13-16. The barn is shaped like a pentagonal prism with dimensions shown in feet.
- What is the area of the roof? (Both sides)
- What is the floor area of the barn?
- What is the area of the sides of the barn?
- What is the total volume of the barn?
- An open top box is made by cutting out 2 in by 2 in squares from the corners of a large square piece of cardboard. Using the picture as a guide, find an expression for the surface area of the box. If the surface area is , find the length of . Remember, there is no top.
- How many one-inch cubes can fit into a box that is 8 inches wide, 10 inches long, and 12 inches tall? Is this the same as the volume of the box?
- A cereal box in 2 inches wide, 10 inches long and 14 inches tall. How much cereal does the box hold?
- A cube holds . What is the length of each edge?