# 8.8: Triangle Classification

**At Grade**Created by: CK-12

**Practice**Triangle Classification

Kevin and Jake began examining a sculpture while the girls were examining the painting with the lines. This sculpture is full of triangles. The boys remember how Mrs. Gilson explained that a triangle is one of the strongest figures that there is and that is why we see triangles in construction.

“Think of a bridge,” Kevin said to Jake. “A bridge has many triangles within it. That is how the whole thing stays together. If we did not have the triangles, the structure could collapse.”

“What about here? Do you think it matters what kind of triangle is used?” Jake asked.

“I don’t know. Let’s look at what they used here.”

The two boys walked around the sculpture and looked at it from all sides. There was a lot to notice. After a little while, Jake was the first one to speak.

“I don’t think it matters which triangle you use,” he said.

“Oh, I do. The isosceles makes the most sense because it is balanced,” Kevin said smiling.

Jake is confused. He can’t remember why an isosceles triangle “is balanced” in Kevin’s words. Jake stops to think about this as Kevin looks at the next sculpture.

**
Do you know what Kevin means? What is an isosceles triangle and how does it “balance?” This Concept will teach you all about triangles and how to classify them. When you finish with this Concept, you will have a chance to revisit this problem. Then you may understand a little better what Kevin means by his words.
**

### Guidance

As we have seen, the angles in a triangle can vary a lot in size and shape, but they always total .

**
We can identify kinds of triangles by the sizes of their angles. A triangle can either be acute, obtuse, or right.
**

Let’s look more closely.

**
Acute triangles
**

**have three acute angles.**In other words, all of their angles measure less than . Below are some examples of acute triangles.

**
Notice that each angle in the triangles above is less than
**
,
**
but the total for each triangle is still
**
.

**
We classify triangles that have an obtuse angle as an
**
**
obtuse triangle.
**
This means that one angle in the triangle measures more than
. Here are some obtuse triangles.

**
You can see that obtuse triangles have one wide angle that is greater than
**
.
**
Still, the three angles in obtuse triangles always add up to
**
.
**
Only one angle must be obtuse to make it an obtuse triangle.
**

The third kind of triangle is a
**
right triangle.
**
As their name implies,

**right triangles have one right angle that measures exactly**. Often, a small box in the corner tells you when an angle is a right angle. Let’s examine a few right triangles.

Once again, even with a right angle, the three angles still total !

Now let’s practice identifying each kind of triangle.

Label each triangle as acute, obtuse, or right.

**
In order to classify the triangles, we must examine the three angles in each. If there is an obtuse angle, it is an obtuse triangle. If there is a right angle, it is a right triangle. If all three angles are less than
**
,
**
it is an acute triangle.
**

One short cut we can use is to compare the angles to . If an angle is exactly , we know the triangle must be a right triangle. If any angle is more than , the triangle must be an obtuse triangle. If there are no right or obtuse angles, the triangle must be an acute triangle. Check to make sure each angle is less than .

There are no right angles in Figure 1. There are no angles measuring more than
. This is probably an acute triangle. Let’s check each angle to be sure:
and
are all less than
so this is definitely an acute triangle.
**
Figure 1 is an acute triangle.
**

Is there any right or obtuse angles in the second triangle? The small box in the corner tells us that the angle is a right angle. Therefore this is a right triangle.
**
Figure 2 is a right triangle.
**

What about Figure 3? It does not have any right angles. It does, however, have an extremely wide angle. Wide angles usually are obtuse. Let’s check the measure to make sure it is more than
. It is
, so it is definitely an obtuse angle. Therefore this is an obtuse triangle.
**
Figure 3 is an obtuse triangle.
**

Figure 4 doesn’t have any right angles. It doesn’t have any wide angles either. Obtuse angles are not always wide, however. Check the angle measures to be sure. The angle measuring
is greater than
so it is obtuse. That makes this an obtuse triangle.
**
Figure 4 is an obtuse triangle.
**

**
Yes. Make a few notes about each type of triangle so that you can remember how to classify them according to their angles.
**

**
You have seen that we can classify triangles by their angles. We can also classify triangles by the lengths of their sides.
**
As you know, every triangle has three sides. Sometimes all three sides are the same length, or
**
congruent.
**
In some triangles, only two sides are congruent. And still other triangles have sides that are all different lengths.

**By comparing the lengths of the sides, we can determine the kind of triangle it is.**

Let’s see how this works.

**
A triangle with three equal sides is an
**
**
equilateral triangle.
**
It doesn’t matter how long the sides are, as long as they are all congruent, or equal. Here are some equilateral triangles.

**
Just remember, equal sides means it’s an equilateral triangle.
**

**
An
**
**
isosceles triangle
**

**has two congruent sides.**It doesn’t matter which two sides, any two will do. Let’s look at some isosceles triangles.

**
The third type of triangle is a
**
**
scalene triangle.
**

**In a scalene triangle, none of the sides are congruent.**

Now let’s practice identifying each kind of triangle.

Classify each triangle as equilateral, isosceles, or scalene.

We need to examine the lengths of the sides in each triangle to see if any sides are congruent. In the first triangle, two sides are 7 meters long, but the third side is shorter. Which kind of triangle has two congruent sides?
**
The first triangle is an isosceles triangle.
**

Now let’s look at the second triangle. All three sides are the same length, so this must be an equilateral triangle.
**
The second triangle is an equilateral triangle.
**

The last triangle has sides of 5 cm, 4 cm, and 8 cm. None of the sides are congruent, so this is a scalene triangle.
**
The last triangle is a scalene triangle.
**

Determine the type of triangles described in each example.

#### Example A

One angle is
**
**
and the other two angles are acute angles.

**
Solution: Obtuse triangle
**

#### Example B

All three angles have the same measure.

**
Solution: Equiangular triangle
**

#### Example C

Two out of three angles measure .

**
Solution: Acute Triangle
**

Here is the original problem once again.

Kevin and Jake began examining a sculpture while the girls were examining the painting with the lines. This sculpture is full of triangles. The boys remember how Mrs. Gilson explained that a triangle is one of the strongest figures that there is and that is why we see triangles in construction.

“Think of a bridge,” Kevin said to Jake. “A bridge has many triangles within it. That is how the whole thing stays together. If we did not have the triangles, the structure could collapse.”

“What about here? Do you think it matters what kind of triangle is used?” Jake asked.

“I don’t know. Let’s look at what they used here.”

The two boys walked around the sculpture and looked at it from all sides. There was a lot to notice. After a little while, Jake was the first one to speak.

“I don’t think it matters which triangle you use,” he said.

“Oh, I do. The isosceles makes the most sense because it is balanced,” Kevin said smiling.

Jake is confused. He can’t remember why an isosceles triangle “is balanced” in Kevin’s words. Jake stops to think about this as Kevin looks at the next sculpture.

**
Kevin’s comment is a little tricky. You can think of an isosceles triangle as being balanced because it has two equal sides. Therefore, if you look at an isosceles triangle, it will be even whereas a scalene triangle would not be. In Kevin’s thinking, this type of triangle makes sense because it would be firm, solid and “balanced.”
**

**
If you think about Kevin’s statement, you can grasp the math by thinking about the properties of an isosceles triangle. Look at the sculpture again. How are triangles being used in the sculpture? Can you see any other types of triangles in this sculpture? Make a few notes in your notebook.
**

### Guided Practice

Here is one for you to try on your own.

Can you identify both the sides and angles of a triangle at the same time?

**
Answer
**

As you can see, the first name identifies the triangle by its angles, and the second name groups it by its sides. Equilateral triangles do not quite fit this pattern. They are always acute. This is because the three angles in an equilateral triangle always measure .

There is one more thing to know about classifying triangles by their angles and sides. We can also tell whether a triangle is isosceles, scalene, or equilateral by its angles. Every angle is related to the side opposite it. Imagine a book opening. The wider you open it, the greater the distance between the two flaps. In other words the wider an angle is, the longer the opposite side.

Therefore we can say that if a triangle has two congruent angles, it must have two congruent sides, and must be isosceles. If it has three angles of different measures, then its sides are also all of different lengths, so it is scalene. Finally, an equilateral triangle, as we have seen, always has angles of
**
**
and these angles are opposite congruent sides.

### Video Review

James Sousa, Angle Relationships and Types of Triangles

### Explore More

Directions: Find the measure of angle in each figure below.

Directions: Identify each triangle as right, acute, or obtuse.

Directions: Identify each triangle as equilateral, isosceles, or scalene.

Directions: Use what you have learned to answer each question.

13. True or false. An acute triangle has three sides that are all different lengths.

14. True or false. A scalene triangle can be an acute triangle as well.

15. True or false. An isosceles triangle can also be a right triangle.

16. True or false. An equilateral triangle has three equal sides.

17. True or false. An obtuse triangle can have multiple obtuse angles.

18. True or false. A scalene triangle has three angles less than 90 degrees.

19. True or false. A triangle with a angle must be an obtuse triangle.

20. True or false. The angles of an equilateral triangle are also equal in measure.

Acute Triangle

An acute triangle has three angles that each measure less than 90 degrees.Congruent

Congruent figures are identical in size, shape and measure.Exterior angles

An exterior angle is the angle formed by one side of a polygon and the extension of the adjacent side.Interior angles

Interior angles are the angles inside a figure.Isosceles Triangle

An isosceles triangle is a triangle in which exactly two sides are the same length.Obtuse Triangle

An obtuse triangle is a triangle with one angle that is greater than 90 degrees.Right Angle

A right angle is an angle equal to 90 degrees.Scalene Triangle

A scalene triangle is a triangle in which all three sides are different lengths.Triangle

A triangle is a polygon with three sides and three angles.Equilateral

A polygon is equilateral if all of its sides are the same length.Equiangular

A polygon is equiangular if all angles are the same measure.### Image Attributions

## Description

## Learning Objectives

Here you'll learn to classify triangles by side lengths and angle measures.

## Related Materials

## Difficulty Level:

At Grade## Authors:

## Tags:

## Subjects:

## Concept Nodes:

## Grades:

## Date Created:

Dec 21, 2012## Last Modified:

May 09, 2015## Vocabulary

**You can only attach files to Modality which belong to you**

If you would like to associate files with this Modality, please make a copy first.