11.2: Bar Graphs and Line Graphs
Introduction
All about the Mushers
The students in Mr. Hawkins’ class have continued to learn about the Iditarod. After learning some of the basics about the distances covered, the students began to research information about the teams, where they come from and how many teams have entered the race in the past few years. Mr. Hawkins has asked them to create either a bar graph or a line graph of the data that they discover.
Tommy and Keith decided to investigate where the mushers come from. They did some research on the computer and discovered that in 2010 there were a total of 71 mushers who entered the race. They came from several different states and countries. Tommy and Keith organized their data like this.
46 Mushers from Alaska
13 Mushers from other US states
12 Mushers from other countries
Now they need to put their data into either a bar graph or a line graph.
Yana and Jena have decided to look at how the number of teams has changed over time. They looked at the number of teams that entered the Iditarod in 2006, 2007, 2008, 2009 and 2010. Here is how they organized their data.
2006 – 83 teams
2007 – 82 teams
2008 – 95 teams
2009 – 67 teams
2010 – 71 teams
Now they need to put their data into either a bar graph or a line graph.
Both teams are stuck. They aren’t sure which graph would best show their data. Do you know? If you have a prediction, make a note of it in your notebook. Which graph should the boys use? Which graph should the girls use?
Now pay attention to this lesson and at the end of it, you will be able to determine if you made the correct choice.
You will also be able to see both of the graphs the students made.
What You Will Learn
In this lesson you will learn to demonstrate the following skills:
 Make a bar graph to display given data.
 Make multiple bar graphs to display and compare given data.
 Make a line graph to display given data over time.
 Make multiple line graphs to display and compare given data.
Teaching Time
I. Make a Bar Graph to Display Given Data
In the last lesson, you learned to analyze data by determining the mean, median, mode, and range for a set of data values. In this lesson, you will use data to create both bar and line graphs.
Tables and graphs are ways to organize and present information so that it can be easily interpreted by the viewer. Graphs are created to show the relationship between two variables. For example, a graph may be constructed to depict the relationship between an object’s mass and volume or the price of gasoline in relationship to location.
A bar graph is a graph that uses columns to show the comparison of quantities or amounts. For example, the bar graph below depicts the average price of one gallon of gasoline in five states. Looking at the bar graph, you can conclude that Hawaii has the highest average cost per gallon of gasoline and Missouri has the lowest cost.
This bar graph was completed for you to analyze. Next you can learn how to take a set of data and create your own bar graph.
Example
Thirty students in grade seven were asked to state their favorite after school activity. The results of this survey are shown on the table. Create a bar graph to display the information from the data table.
Favorite Activity:  Number of Students: 

Watching T.V.  9 
Playing sports/exercising  6 
Reading  7 
Hanging out with friends  5 
Babysitting  3 
To create a bar graph
1. Draw the horizontal
2. Give the graph the title “Seventh Grader’s Favorite Activities.”
3. Label the horizontal axis “Favorite Activity.”
4. Label the vertical axis “Number of Students.”
5. Look at the range in data and decide how the units on the vertical axis
6. For each activity on the horizontal
Example
The data table below depicts the recommended minimum number of hours of sleep people need by age. Create a bar graph using the information from the data table.
Age Group:  Recommended Hours of Sleep: 

Infants (0–1 years old)  15 hours 
Children (2–5 years old)  13 hours 
Children (6–11 years old)  11 hours 
Teens  9 hours 
Adults  8 hours 
To create a bar graph:
 Draw the horizontal
(x) and vertical(y) axis.  Since the graph is about sleep, give the graph the title “Sweet Dreams.”
 Label the horizontal axis “Age.”
 Label the vertical axis “Hours of Sleep.”
 Look at the range in data and decide how the units on the vertical axis
(y) should be labeled. In this case, label the vertical axis 0  16 by twos.  For each age group on the horizontal
(x) axis, draw a vertical column to the appropriate value. For example, for “Infants,” draw a vertical column to fifteen hours.
Looking at bar graphs can help us to make conclusions about the data.
Looking at the bar graph “Sweet Dreams,” what can you infer about age and the recommended number of hours of sleep?
Looking at the graph, you can see that one needs less sleep as they grow older. It is recommended that infants sleep a minimum of fifteen hours a day. However, it is recommended that adults sleep a minimum of eight hours a day. This difference of seven hours is also known as the range.
Take a few minutes and write down the steps to creating a bar graph.
II. Make Multiple Bar Graphs to Display and Compare Given Data
A multiple bar graph is similar to a bar graph, but depicts two or three pieces of information for each item on the horizontal
Thirtyfive girls and thirtyseven boys were asked to state their favorite sport. The results of the survey are displayed on the graph below. You can make several inferences studying the graph “Favorite Sports.” You can see that soccer was the favorite sport among girls and track was the least favorite. More boys preferred basketball than any other choice. Equal numbers of boys and girls stated that their favorite sport was baseball.
Here is a bar graph to show the data.
Example
Frank’s Farm Stand kept track of the number of pounds of vegetables sold over a threeday period. The results are listed on the table below. Create a multiple bar graph to display and compare the amounts of vegetables sold over the three day period.
Type of Vegetable:  Pounds Sold: Day One  Pounds Sold: Day Two  Pounds Sold: Day Three 

Squash  32 lbs.  36 lbs.  36 lbs. 
Zucchini  40 lbs.  33 lbs.  37 lbs. 
Corn  56 lbs.  65 lbs.  67 lbs. 
Carrots  28 lbs.  25 lbs.  23 lbs. 
Romaine Lettuce  27 lbs.  31 lbs.  34 lbs. 
Tomatoes  44 lbs.  54 lbs.  58 lbs. 
To create a multiple bar graph:
 Draw the horizontal
(x) and vertical(y) axis.  Give the graph the title “Frank’s Farm Stand.”
 Label the horizontal axis “Vegetables.”
 Label the vertical axis “Pounds Sold.”
 Look at the range in data and decide how the units on the vertical axis
(y) should be labeled. In this case, label the vertical axis 0  80 by tens.  For each vegetable on the horizontal
(x) axis, draw a vertical column to the appropriate value three times, one column representing day one, a second column for day two, and a third column for day three.  Choose three colors, one to represent the values for day one, one for the values for day two, and finally one to represent the values for day three.
You can also draw conclusions about data from multiple bar graphs. These comparisons can help you to discover patterns and trends about statistics.
Looking at the bar graph “Frank’s Farm Stand,” what can you infer about the difference in sales over the three day period?
It is apparent that sales of squash, corn, romaine lettuce, and tomatoes increased over the three day period. Zucchini sales dropped on day two, but increased on day three. However, carrot sales declined on day two and again on day three. Note that the same amount of carrots and romaine lettuce were sold on day one.
Example
Taylor created a table to compare the amount of gravitational pull on each planet compared to that on Earth. Create a multiple bar graph to display the information from Taylor’s chart.
Planet Name:  Planet’s Gravitational Pull:  Earth’s Gravitational Pull: 

Mercury 


Venus 


Mars 


Jupiter 


Saturn 


Uranus 


Neptune 


To create a multiple bar graph:
 Draw the horizontal
(x) and vertical(y) axis.  Give the graph the title “Planet’s Gravitational Pull.”
 Label the horizontal axis “Planets.”
 Label the vertical axis “Gravitational Pull.”
 Look at the range in data and decide how the units on the vertical axis
(y) should be labeled. In this case, label the vertical axis 03 by 0.5.  For each planet on the horizontal
(x) axis, draw a vertical column to the appropriate value. For example, the vertical column should reach 0.38 for Mercury to show its gravitational pull.  Next to each vertical column for each planet, draw a vertical column that reaches 1.0 to represent the gravitational pull on Earth.
 Choose two colors, one to represent the values for each planet and another to represent the value for Earth.
Looking at the double bar graph “Planet’s Gravitational Pull,” what can you infer about each planet?
This graph compares the gravitational pull on Earth with the other seven major planets. You can see that with the exception of Jupiter and Neptune, all planets have a gravitational pull less than that of Earth. You can see that Mercury and Mars both have a gravitational pull of
Write down the steps to creating multiple bar graphs in your notebook.
III. Make a Line Graph to Display Given Data over Time
Another way to look at data is through a line graph.
A line graph is a series of connected points that displays data or information that changes over time.
The line graph below illustrates the change in temperature over the first seven days in February in Boston, Massachusetts. Looking at the changes of the line, you can see that the temperature rose the first three days, February
Now that you can see how the information is shown in a line graph, the next step is to learn how to make one yourself. Here is an example.
Example
The population for the city of Los Angeles has been recorded on the data table below. Create a line graph to depict the population change from the year 1950 to the year 2000.
Year:  Approximate Population: 

1950  2,000,000 
1960  2,500,000 
1970  2,800,000 
1980  3,000,000 
1990  3,500,000 
2000  3,700,000 
To create a line graph:
 Draw the horizontal
(x) and vertical(y) axis.  Give the graph the title “Population of Los Angeles 19502000.”
 Label the horizontal axis “Year.”
 Label the vertical axis “Population.”
 Look at the range in data and decide how the units on the vertical axis
(y) should be labeled. In this case, label the vertical axis 0 – 4,000,000 by five hundred thousands.  Plot the population for each year on the horizontal axis. For example, put a point at 2,000,000 to show the population for the year 1950. Above the year 1960, put a point at 2,500,000 and so on. Connect the points as you go.
Now that you have created a line graph, you can analyze the data and draw conclusions based on the reported statistics.
Looking at the line graph, what can you infer about the change in population from 1950 to 2000?
It is evident that the population has risen since the year 1950. You can see that the greatest change in population occurred from the years 1950 to 1960 and again from 1980 to 1990. You can see that the smallest change in population occurred between the years of 1990 and 2000. From 1990 to 2000, the population only grew by 200,000 people. Judging by the trend of the graph, you could predict that the population of Los Angeles will continue to increase over time.
Example
The Electronic Energies Alliance recorded the average cost of one gallon of gasoline in the United States for the years 20002007. Present the information on the data table on a line graph.
Year:  Average Cost of One Gallon of Gasoline 

2000  $1.57 
2001  $1.10 
2002  $1.46 
2003  $1.59 
2004  $2.03 
2005  $2.25 
2006  $3.30 
2007  $3.00 
To create a line graph:
1. Draw the horizontal
2. Give the graph the title “Change in Cost of Gasoline 20002007.”
3. Label the horizontal axis “Year.”
4. Label the vertical axis “Cost of Gasoline.”
5. Look at the range in data and decide how the units on the vertical axis
6. Plot the price of gasoline for each year on the horizontal axis. For example, put a point slightly above 1.5 to show that the cost of one gallon of gas in the year 2000 was $1.59. Place a point slightly above 1 to show that they cost of one gallon of gas in the year 2001 was $1.10. Use a straight edge to connect the points as you go.
Looking at the line graph, what can you conclude about the cost of gasoline from the years 20002007?
The price of a gallon of gasoline has increased approximately $1.50 over eight years. You'll notice that the price of a gallon of gasoline dropped in the years 2001 and 2007, but increased in all other years.
IV. Make Multiple Line Graphs to Display and Compare Given Data
Recall that a line graph displays changes in data over time. A multiple line graph displays changes in two or three sets of data over time.
Eleanor Roosevelt School recorded the daily indoor and outdoor temperature for a period of five days. The results of the data collection are presented on the double line graph below. Looking at the graph, you can see that the outdoor temperature was cooler than the indoor temperature. It can also be concluded that as the outdoor temperature decreased, the indoor temperature decreased. The same holds true as the temperature increased.
Now let’s look at some examples of how we can create multiple line graphs and then interpret the data displayed on them.
Example
Fulltime and parttime enrollment at California State University for the past five years is recorded on the data table below. Create a multiple line graph to represent the information on the data table.
Year:  Number of Students Attending FullTime:  Number of Students Attending PartTime: 

2003  10,000  2,000 
2004  9,500  2,100 
2005  11,100  2,050 
2006  12,000  2,700 
2007  13,300  2,550 
To create a multiple line graph:
 Draw the horizontal
(x) and vertical(y) axis.  Give the graph the title “Enrollment at California State University.”
 Label the horizontal axis “Year.”
 Label the vertical axis “Number of Students.”
 Look at the range in data and decide how the units on the vertical axis
(y) should be labeled. In this case, label the vertical axis 0 – 14,000 by thousands.  Use one color pen to plot the data for fulltime students first. For example, for the year 2003, place a point at 10,000. For the year 2004, place a point between 9,000 and 10,000 to show that the enrollment was 9,500. As you continue to plot the enrollment for each year, use a straight edge to connect the points.
 Use another color pen to plot the data for parttime students. For the year 2003, place at point at 2,000. For the year 2004, place a point slightly above 2,000 to show that the enrollment for that year was 2,100. As you continue to plot the enrollment for each year, use a straight edge to connect the points.
Looking at the line graphs, what can you conclude about enrollment at California State University?
You can see that the number of fulltime students enrolled increased by 3,300 students from 2003 to 2007. While fulltime enrollment declined between 2003 an 2004, it increased every other year. The number of parttime students enrolled increased by 550 students from 2003 to 2007. It is apparent that the increase in fulltime enrollment was greater than the increase in parttime enrollment.
Real Life Example Completed
All about the Mushers
Here is the original problem once again. Reread it and then look at the graphs created.
The students in Mr. Hawkins’ class have continued to learn about the Iditarod. After learning some of the basics about the distances covered, the students began to research information about the teams, where they come from and how many teams have entered the race in the past few years. Mr. Hawkins has asked them to create either a bar graph or a line graph of the data that they discover.
Tommy and Keith decided to investigate where the mushers come from. They did some research on the computer and discovered that in 2010, there were a total of 71 mushers who entered the race. They came from several different states and countries. Tommy and Keith organized their data like this.
46 Mushers from Alaska
13 Mushers from other US states
12 Mushers from other countries
Now they need to put their data into either a bar graph or a line graph.
Yana and Jena have decided to look at how the number of teams has changed over time. They looked at the number of teams that entered the Iditarod in 2006, 2007, 2008, 2009 and 2010. Here is how they organized their data.
2006 – 83 teams
2007 – 82 teams
2008 – 95 teams
2009 – 67 teams
2010 – 71 teams
Now they need to put their data into either a bar graph or a line graph.
Let’s start with the boys. They are looking at the number of mushers from different places. Nothing is changing in their data over timetherefore it makes the most sense for them to use a bar graph. They are also looking at the frequency of mushers from each location. Here is a bar graph that best shows their data.
Next, we can look at the girls. The girls are looking at how the number of teams that has entered the Iditarod has changed over time. They are comparing data that has changed. When we compare data and how it changes, we use a line graph. That is the best way to show this data.
Vocabulary
 Bar Graph
 a graph designed to compare data and show the frequency of the data.
 Multiple Bar Graph
 a graph that shows how different strands of data compare over time. It shows the frequency of this data and compares it at the same time.
 Line Graph
 shows how data changes over time.
 Multiple Line Graphs
 show how different strands of data change over time.
Technology Integration
Khan Academy, Reading Bar Graphs
Khan Academy, Reading Line Graphs
Time to Practice
Directions: The multiple bar graph below depicts the number of Major League Baseball teams in each state, as well as the number of World Series Championships won by each state. Use the graph to answer the questions.
1. How many Major League Baseball teams are represented on the graph? _____
2. How many World Championships are represented on the graph? _____
3. How many of states on the graph have won a Major League Championship? _____
4. Which states have equal numbers of Major League Baseball teams? _____
5. Which state has won the greatest number of World Championships? _____
Directions: Twenty students in
6. Create a multiple bar graph to display the information from the table.
Name of Device:  \begin{align*}6^{th}\end{align*} Grade Answers:  \begin{align*}7^{th}\end{align*} Grade Answers:  \begin{align*}8^{th}\end{align*} Grade Answers: 

Television  35  28  31 
DVD Player  30  28  20 
Computer  19  20  17 
Game System  15  14  20 
Video Camera  14  17  12 
7. What is the most common electronic device in the sixth grade?
8. What is the most common electronic device in the seventh grade?
9. What is the most common electronic device in the eighth grade?
10. What is the least common electronic device in the sixth grade?
11. What is the least common electronic device in the seventh grade?
12. What is the least common electronic device in the eighth grade?
Directions: The table below shows the number of tickets sold at the Phoenix Zoo and the Seattle Zoo since 1998.
13. Create a multiple line graph using the data from the table.
Year:  Number of Tickets Sold at Phoenix Zoo:  Number of Tickets Sold at Seattle Zoo: 

1998  547,000  601,000 
1999  562,000  602,500 
2000  569,000  603,700 
2001  566,000  605,000 
2002  569,000  604,000 
2003  572,000  605,100 
2004  576,000  606,000 
2005  575,500  605,800 
2006  579,000  607,000 
2007  580,000  608,000 
14. Which zoo sold more tickets in 2003?
15. Which zoo sold more tickets in 2005?
16. Which was the best year for sales at the Phoenix zoo?
17. Which was the best year for sales at the Seattle zoo?
18. Based on this information, can we say which zoo is more popular? Why?
19. Based on this data, will sales increase or decrease in 2008 at the Phoenix zoo?
20. Based on this data, will sales increase or decrease in 2008 at the Seattle zoo?
Directions: The data table below depicts the increase in cost of a movie ticket each year since 2000.
Year:  Price of a Ticket: 

2000  $5.50 
2001  $5.75 
2002  $6.00 
2003  $6.25 
2004  $6.50 
2005  $7.25 
2006  $8.00 
2007  $9.25 
21. Decide which type of graph, bar or line, should be used to represent the information in the data table.
22. Use the information on the data table to create the graph you’ve chosen.
Directions: The data table below depicts the number of newspapers in circulation (in millions) over a period of three days.
23. Decide which type of graph, bar or line, should be used to represent the information in the data table.
24. Use the information on the data table to create the graph you’ve chosen.
Name of Newspaper  Friday  Saturday  Sunday 

Los Angeles Times  55  58  60 
New York Times  62  63  67 
Chicago Sun  47  49  49 
Orange County Register  39  41  42 
San Francisco Chronicle  51  53  55 
Notes/Highlights Having trouble? Report an issue.
Color  Highlighted Text  Notes  

Please Sign In to create your own Highlights / Notes  
Show More 