<img src="https://d5nxst8fruw4z.cloudfront.net/atrk.gif?account=iA1Pi1a8Dy00ym" style="display:none" height="1" width="1" alt="" />
Dismiss
Skip Navigation

1.15: Angles of Rotation in Standard Positions

Difficulty Level: At Grade Created by: CK-12
Atoms Practice
Estimated4 minsto complete
%
Progress
Practice Angles of Rotation in Standard Positions
 
 
 
MEMORY METER
This indicates how strong in your memory this concept is
Practice
Progress
Estimated4 minsto complete
%
Estimated4 minsto complete
%
Practice Now
MEMORY METER
This indicates how strong in your memory this concept is
Turn In

While playing a game with friends, you are using a spinner. You know that the best number to land on is \begin{align*}7\end{align*}7. The spinner looks like this:

Can you determine how to represent the angle of the spinner if it lands on the \begin{align*}7\end{align*}7?

Angles of Rotation in Standard Positions

Consider our game that is played with a spinner. When you spin the spinner, how far has it gone? You can answer this question in several ways. You could say something like “the spinner spun around 3 times.” This means that the spinner made 3 complete rotations, and then landed back where it started.

We can also measure the rotation in degrees. In the previous lesson we worked with angles in triangles, measured in degrees. You may recall from geometry that a full rotation is 360 degrees, usually written as \begin{align*}360^\circ\end{align*}360. Half a rotation is then \begin{align*}180^\circ\end{align*}180 and a quarter rotation is \begin{align*}90^\circ\end{align*}90. Each of these measurements will be important in this Concept. We can use our knowledge of graphing to represent any angle. The figure below shows an angle in what is called standard position.

The initial side of an angle in standard position is always on the positive \begin{align*}x-\end{align*}xaxis. The terminal side always meets the initial side at the origin. Notice that the rotation goes in a counterclockwise direction. This means that if we rotate clockwise, we will generate a negative angle. Below are several examples of angles in standard position.

The 90 degree angle is one of four quadrantal angles. A quadrantal angle is one whose terminal side lies on an axis. Along with \begin{align*}90^\circ, \ 0^\circ, \ 180^\circ\end{align*}90, 0, 180 and \begin{align*}270^\circ\end{align*}270 are quadrantal angles.

These angles are referred to as quadrantal because each angle defines a quadrant. Notice that without the arrow indicating the rotation, \begin{align*}270^\circ\end{align*}270 looks as if it is a \begin{align*}-90^\circ\end{align*}90, defining the fourth quadrant. Notice also that \begin{align*}360^\circ\end{align*}360 would look just like \begin{align*}0^\circ\end{align*}0.

Finding the Angle of Rotation

Identify what the angle is in this graph:

The angle drawn out is \begin{align*}135^\circ\end{align*}135.

Identifying Angles 

Identifying the angles within the following graphs. 

1. 

The angle drawn out is \begin{align*}0^\circ\end{align*}0.

2. 

The angle drawn out is \begin{align*}30^\circ\end{align*}30

Examples

Example 1

Earlier, you were asked to determine how to represent the angle of the spinner if it lands on the 7. 

Since you know that the angle between the horizontal and vertical directions is \begin{align*}90^\circ\end{align*}90, each number on the spinner takes up \begin{align*}30^\circ\end{align*}30. Therefore, since you are on the \begin{align*}7\end{align*}7, you know that you are \begin{align*}\frac{2}{3}\end{align*}23 of the way to the vertical. Therefore, the angle of the spinner when it lands on \begin{align*}7\end{align*}7 is \begin{align*}60^\circ\end{align*}60.

Example 2

Identify what the angle is in this graph, using negative angles:

The angle drawn out is \begin{align*}-135^\circ\end{align*}135.

Example 3

Identify what the angle is in this graph, using negative angles:

The angle drawn out is \begin{align*}-180^\circ\end{align*}180.

Example 4

Identify what the angle is in this graph, using negative angles:

 The angle drawn out is \begin{align*}-225^\circ\end{align*}225.

Review

  1. Draw an angle of \begin{align*}90^\circ\end{align*}90.
  2. Draw an angle of \begin{align*}45^\circ\end{align*}45.
  3. Draw an angle of \begin{align*}-135^\circ\end{align*}135.
  4. Draw an angle of \begin{align*}-45^\circ\end{align*}45.
  5. Draw an angle of \begin{align*}-270^\circ\end{align*}270.
  6. Draw an angle of \begin{align*}315^\circ\end{align*}315.

For each diagram, identify the angle. Write the angle using positive degrees.

For each diagram, identify the angle. Write the angle using negative degrees.

  1. Explain how to convert between angles that use positive degrees and angles that use negative degrees.
  2. At what angle is the 7 on a standard 12-hour clock? Use positive degrees.
  3. At what angle is the 2 on a standard 12-hour clock? Use positive degrees.

Review (Answers)

To see the Review answers, open this PDF file and look for section 1.15. 

Notes/Highlights Having trouble? Report an issue.

Color Highlighted Text Notes
Please to create your own Highlights / Notes
Show More

Vocabulary

TermDefinition
Quadrantal Angle A quadrantal angle is an angle that has its terminal side on one of the four lines of axis: positive x, negative x, positive y or negative y.
Standard Position The standard position of an angle measures an angle starting from the positive x-axis and going counter-clockwise. It is the typical method for drawing and measuring an angle.

Image Attributions

Show Hide Details
Description
Difficulty Level:
At Grade
Subjects:
Grades:
Date Created:
Sep 26, 2012
Last Modified:
Aug 11, 2016
Save or share your relevant files like activites, homework and worksheet.
To add resources, you must be the owner of the Modality. Click Customize to make your own copy.
Please wait...
Please wait...
Image Detail
Sizes: Medium | Original
 
MAT.TRG.152.L.1