5.2: Newton's Laws Explained
The First Law is about inertia; objects at rest stay at rest unless acted upon and objects in motion continue that motion in a straight line unless acted upon. Prior to Newton and Galileo, the prevailing view on motion was still Aristotle's. According to his theory the natural state of things is at rest; force is required to keep something moving at a constant rate. This made sense to people throughout history because on earth, friction and air resistance slow moving objects. When there is no air resistance (or other sources of friction), a situation approximated in space, Newton's first law is much more evident.
The “motion” Newton mentions in the Second Law is, in his language, the product of the mass and velocity of an object  we call this quantity momentum  so the Second Law is actually the famous equation:
That is, the acceleration experienced by an object will be proportional to the applied force and inversely proportional to its mass. If there are multiple forces, they can be added as vectors and it is the net force that matters:
When the net force on an object is zero, it is said to be in translational equilibrium:
Finally, the Third Law states that you can't push someone or something without being pushed back. This law is somewhat confusing: if to each applied force there is an equal and opposite force, why does anything ever accelerate? The key is that the ‘equal and opposite’ forces act on different objects. If I push a cart, the cart is in turn pushing on me. However, I'm also pushing (and being pushed by) the earth, through my feet. Therefore, in the end, the cart and I move in the same direction and the earth moves opposite us. The cartperson system experienced a net force in one direction, while the earth experienced an equal and opposite force. According to Newton's second law, the acceleration objects experience due to applied forces is inversely proportional to their mass; clearly, the earth  with its gigantic mass  doesn't move very far compared to the cart and person.
Newton's Laws Example
Question: Tom and Mary are standing on identical skateboards. Tom and Mary push off of each other and travel in opposite directions.
a) If Tom and Mary have identical masses, who travels farther?
b) If Tom has a bigger mass than Mary, who goes farther?
c) If Tom and Mary have identical masses and Tom pushes twice as hard as Mary, who goes farther?
Solution
a) Neither. Both Tom and Mary will travel the same distance. The forced applied to each person is the same (Newton's Third Law). So
which cancels to
Therefore both people will travel the same distance because the acceleration controls how far someone will travel and Tom and Mary have equal acceleration.
b) Mary will go farther. Again, the same force is applied to both Mary and Tom so
Since Tom has the larger mass, his acceleration must be smaller (acceleration and mass are inversely proportional). Finally, because Mary's acceleration is greater, she will travel farther.
c) Neither. Newton's Third Law states that for every action there is an equal and opposite reaction. Therefore if Tom pushes twice as hard as Mary, Mary will essentially be pushing back with the same strength. They will therefore travel the same distance if they have the same mass.
Key Concepts
 An object will not change its state of motion (i.e., accelerate) unless an unbalanced force acts on it. Equal and oppositely directed forces do not produce acceleration.
 If no unbalanced force acts on an object the object remains at constant velocity or at rest.
 The force of gravity is called weight and equals , where is the acceleration due to gravity of the planet (, downward, on Earth).
 Your mass does not change when you move to other planets, because mass is a measure of how much matter your body contains, and not how much gravitational force you feel.
 A free body diagram (FBD) is a diagram that shows all the forces acting on an object. It is essential to draw this diagram before attempting to answer a question or solve a problem. If the FBD is drawn correctly then solving the problem is made easy.
 For incline planes, it is often convenient to rotate the axis such that the xdirection points down the incline and the ydirection points perpendicular to the surface. This will make the math easier to work with as there will be less vectors to break into components.
 To calculate the net force on an object, you need to calculate all the individual forces acting on the object and then add them as vectors. This requires some mathematical skill.
 Air resistance is generally not considered in this chapter, however it is important when an object is moving at high speeds through an atmosphere and is generally proportional to the velocity or the velocity squared for slow or fast speeds, respectively.
 Newton’s Law states for every force there is an equal but opposite reaction force. To distinguish a third law pair from merely oppositely directed pairs is difficult, but very important. Third law pairs must obey three rules: (1) Third law force pairs must be of the same type of force. (2) Third law force pairs are exerted on two different objects. (3) Third law force pairs are equal in magnitude and oppositely directed. Example: A block sits on a table. The Earth’s gravity on the block and the force of the table on the block are equal and opposite. But these are not third law pairs, because they are both on the same object and the forces are of different types. The proper third law pairs are: (1) earth’s gravity on block/block’s gravity on earth and (2) table pushes on block/ block pushes on table.
 If you’re asked to evaluate a vector, you may state the and components of the vector, or a magnitude and an angle with respect to the horizontal.
Key Equations
Acceleration depends on force and mass:
Ultimately, many of these “contact” forces are due to attractive and repulsive electromagnetic forces between atoms in materials.
Problem Solving for Newton’s Laws, StepByStep

Figure out which object is “of interest.”
 If you're looking for the motion of a rolling cart, the cart is the object of interest.
 If the object of interest is not moving, that's OK, don't panic yet.
 Draw a sketch! This may help you sort out which object is which in your problem.

Identify all the forces acting on the object and draw them on object. (This is a freebody diagram FBD)
 If the object has mass and is near the Earth, the easiest (and therefore, first) force to write down is the force of gravity, pointing downward, with value mg.
 If the object is in contact with a flat surface, it means there is a normal force acting on the object. This normal force points away from and is perpendicular to the surface.
 There may be more than one normal force acting on an object. For instance, if you have a bologna sandwich, remember that the slice of bologna feels normal forces from both the slices of bread!
 If a rope, wire, or cord is pulling on the object in question, you've found yourself a tension force. The direction of this force is in the same direction that the rope is pulling.
 Don't worry about any forces acting on other objects. For instance, if you have a bologna sandwich as your object of interest, and you're thinking about the forces acting on the slice of bologna, don't worry about the force of gravity acting on either piece of bread.
 Remember that Newton's Law, calling for “equal and opposite forces,” does not apply to a single object. None of your forces should be “equal and opposite” on the same object in the sense of Newton's Law. Third law pairs act on two different objects.
 Recall that scales (like a bathroom scale you weigh yourself on) read out the normal force acting on you, not your weight. If you are at rest on the scale, the normal force equals your weight. If you are accelerating up or down, the normal force had better be higher or lower than your weight, or you won’t have an unbalanced force to accelerate you.
 Never include “ma” as a force acting on an object. “ma” is the result for which the net force is the cause.

Identify which forces are in the direction, which are in the direction, and which are at an angle.
 If a force is upward, make it in the direction and give it a positive sign. If it is downward, make it in the direction and give it a negative sign.
 Same thing applies for right vs. left in the direction. Make rightward forces positive.
 If forces are at an angle, draw them at an angle. A great example is that when a dog on a leash runs ahead, pulling you along, it’s pulling both forward and down on your hand.
 Draw the free body diagram (FBD).
 Remember that the FBD is supposed to be helping you with your problem. For instance, if you forget a force, it'll be really obvious on your FBD.
 Break the forces that are at angles into their and components
 Use right triangle trigonometry
 Remember that these components aren't new forces, but are just what makes up the forces you've already identified.
 Consider making a second FBD to do this component work, so that your first FBD doesn't get too messy.

Add up all the forces and components.
 Remember that all the rightward forces add with a plus sign, and that all the leftward forces add with a minus sign.
 Don't forget about the components of any forces that are at an angle!
 When you've added them all up, call this “the sum of all forces” or “the net force in the direction.”

Add up all the forces and components.
 Remember that all the upward forces add with a sign, all the downward forces add with a sign.
 Don't forget about the components of any forces that are at an angle!
 When you've added them all up, call this “the sum of all forces“ or “net force in the direction.”

Use Newton's Laws twice.
 The sum of all forces, divided by the mass, is the object's acceleration in the direction.
 The sum of all forces, divided by the mass, is the object's acceleration in the direction.
 If you happen to know that the acceleration in the direction or direction is zero (say the object is just sitting on a table), then you can plug this in to Newton’s Law directly.
 If you happen to know the acceleration, you can plug this in directly too.

Each body should have a FBD.
 Draw a separate FBD for each body.
 Set up a sum of forces equation based on the FBD for each body.
 Newton’s Third Law will tell you which forces on different bodies are the same in magnitude.
 Your equations should equal your unknown variables at this point.
Newton’s Laws Problem Set
 A VW Bug hits a huge truck headon. Each vehicle was initially going .
 Which vehicle experiences the greater force?
 Which experiences the greater acceleration?
 Is it possible for me to wave my hand and keep the rest of my body perfectly still? Why or why not?
 How does a rocket accelerate in space, where there is nothing to ‘push off’ against?
 Is there a net force on a hammer when you hold it steady above the ground? If you let the hammer drop, what’s the net force on the hammer while it is falling to the ground?
 If an object is moving at constant velocity or at rest, what is the minimum number of forces acting on it (other than zero)?
 If an object is accelerating, what is the minimum number of forces acting on it?
 You are standing on a bathroom scale. Can you reduce your weight by pulling up on your shoes? (Try it.)
 When pulling a paper towel from a paper towel roll, why is a quick jerk more effective than a slow pull?
 You and your friend are standing on identical skateboards with an industrialstrength compressed spring in between you. After the spring is released, it falls straight to the ground and the two of you fly apart.
 If you have identical masses, who travels farther?
 If your friend has a bigger mass who goes farther?
 If your friend has a bigger mass who feels the larger force?
 If you guys have identical masses, even if you push on the spring, why isn’t it possible to go further than your friend?
 Explain the normal force in terms of the microscopic forces between molecules in a surface.
 A stone with a mass of is sitting on the ground, not moving.
 What is the weight of the stone?
 What is the normal force acting on the stone?
 The stone from the last question is now being pulled horizontally along the ground at constant speed in the positive direction. Is there a net force on the stone?
 A spring with spring constant has an uncompressed length of . When fully compressed, it has a length of . What force is required to fully compress the spring?
 Measuring velocity is hard: for instance, can you tell how fast you’re going around the Sun right now? Measuring acceleration is comparatively easy — you can feel accelerations. Here’s a clever way to determine your acceleration. As you accelerate your car on a flat stretch, you notice that the fuzzy dice hanging from your rearview mirror are no longer hanging straight up and down. In fact, they are making a angle with respect to the vertical. What is your acceleration? (Hint: Draw a FBD. Consider both and equations.)
 Draw free body diagrams (FBDs) for all of the following objects involved (in bold) and label all the forces appropriately. Make sure the lengths of the vectors in your FBDs are proportional to the strength of the force: smaller forces get shorter arrows!
 A man stands in an elevator that is accelerating upward at .
 A boy is dragging a sled at a constant speed. The boy is pulling the sled with a rope at a angle.
 Your foot presses against the ground as you walk.
 The picture shown here is attached to the ceiling by three wires.
 Analyze the situation shown here with a big kid pulling a little kid in a wagon. You’ll notice that there are a lot of different forces acting on the system. Let’s think about what happens the moment the sled begins to move.
 First, draw the free body diagram of the big kid. Include all the forces you can think of, including friction. Then do the same for the little kid.
 Identify all third law pairs. Decide which forces act on the two body system and which are extraneous.
 Explain what conditions would make it possible for the twobody system to move forward.
 Break the force vector on the right into its and components, and .
 For both figures below, find the net force and its direction (i.e., the magnitude of and the angle it makes with the axis). Draw in
 Andreas and Kaya are pulling a wagon. Andreas is pulling with a force of towards the northeast. Kaya is pulling with a force of towards the southeast. The wagon has a mass of . What is the acceleration and direction of motion of the wagon?
 Laura and Alan are pulling a wagon. Laura is pulling with a force of towards the northeast. Alan is pulling with a force of directly east. The wagon has a mass of . What is the acceleration and direction of motion of the wagon?
 When the box to the right is pulled with a force of , it just starts to move (i.e., the maximum value of static friction is overcome with a force of ). What is the value of the coefficient of static friction, ?
 A different box, this time in mass, is being pulled with a force of and is sliding with an acceleration of . Find the coefficient of kinetic friction, .
 The man is hanging from a rope wrapped around a pulley and attached to both of his shoulders. The pulley is fixed to the wall. The rope is designed to hold of weight; at higher tension, it will break. Let’s say he has a mass of . Draw a free body diagram and explain (using Newton’s Laws) whether or not the rope will break.
 Now the man ties one end of the rope to the ground and is held up by the other. Does the rope break in this situation? What precisely is the difference between this problem and the one before?
 For a boy who weighs on Earth what are his mass and weight on the moon (where ?
 A woman of mass weighs herself in an elevator.
 If she wants to weigh less, should she weigh herself when accelerating upward or downward?
 When the elevator is not accelerating, what does the scale read (i.e., what is the normal force that the scale exerts on the woman)?
 When the elevator is accelerating upward at , what does the scale read?
 A crane is lowering a box of mass with an acceleration of .
 Find the tension in the cable.
 If the crane lowers the box at a constant speed, what is the tension in the cable?
 The large box on the table is and is connected via a rope and pulley to a smaller box, which is hanging. The mass is the highest mass you can hang without moving the box on the table. Find the coefficient of static friction .
 Find the mass of the painting. The tension in the leftmost rope is , in the middle rope it is , and in the rightmost rope it is .
 Find Brittany’s acceleration down the frictionless waterslide in terms of her mass , the angle of the incline, and the acceleration of gravity .
 The physics professor holds an eraser up against a wall by pushing it directly against the wall with a completely horizontal force of . The eraser has a mass of . The wall has coefficients of friction and
 Draw a free body diagram for the eraser.
 What is the normal force acting on the eraser?
 What is the frictional force equal to?
 What is the maximum mass m the eraser could have and still not fall down?
 What would happen if the wall and eraser were both frictionless?
 A tractor of mass accelerates up a incline from rest to a speed of in . For all of answers below, provide a magnitude and a direction.
 What net force has been applied to the tractor?
 What is the normal force, on the tractor?
 What is the force of gravity on the tractor?
 What force has been applied to the tractor so that it moves uphill?
 What is the source of this force?
 A heavy box (mass ) is dragged along the floor by a kid at a angle to the horizontal with a force of (which is the maximum force the kid can apply).
 Draw the free body diagram.
 What is the normal force ?
 Does the normal force decrease or increase as the angle of pull increases? Explain.
 Assuming no friction, what is the acceleration of the box?
 Assuming it begins at rest, what is its speed after ten seconds?
 Is it possible for the kid to lift the box by pulling straight up on the rope?
 In the absence of friction, what is the net force in the direction if the kid pulls at a angle?
 In the absence of friction, what is the net force in the direction if the kid pulls at a angle?
 In the absence of friction, what is the net force in the direction if the kid pulls at a angle?
 The kid pulls the box at constant velocity at an angle of . What is the coefficient of kinetic friction between the box and the floor?
 The kid pulls the box at an angle of , producing an acceleration of . What is the coefficient of kinetic friction between the box and the floor?
 For the following situation, identify the law force pairs on the associated free body diagrams. Label each member of one pair each member of the next pair and so on. The spring is stretched so that it is pulling the block of wood to the right. Draw free body diagrams for the situation below. Notice that we are pulling the bottom block out from beneath the top block. There is friction between the blocks! After you have drawn your FBDs, identify the law force pairs, as above.
 Spinal implant problem — this is a real life biomed engineering problem! Here’s the situation: both springs are compressed by an amount . The rod of length is fixed to both the top plate and the bottom plate. The two springs, each with spring constant , are wrapped around the rod on both sides of the middle plate, but are free to move because they are not attached to the rod or the plates. The middle plate has negligible mass, and is constrained in its motion by the compression forces of the top and bottom springs. The medical implementation of this device is to screw the top plate to one vertebrae and the middle plate to the vertebrae directly below. The bottom plate is suspended in space. Instead of fusing broken vertebrates together, this implant allows movement somewhat analogous to the natural movement of functioning vertebrae. Below you will do the exact calculations that an engineer did to get this device patented and available for use at hospitals.
 Find the force, , on the middle plate for the region of its movement . Give your answer in terms of the constants given. (Hint: In this region both springs are providing opposite compression forces.)
 Find the force, , on the middle plate for the region of its movement . Give your answer in terms of the constants given. (Hint: In this region, only one spring is in contact with the middle plate.)
 Graph vs. . Label the values for force for the transition region in terms of the constants given.
 You design a mechanism for lifting boxes up an inclined plane by using a vertically hanging mass to pull them, as shown in the figure below. The pulley at the top of the incline is massless and frictionless. The larger mass, , is accelerating downward with a measured acceleration a. The smaller masses are and ; the angle of the incline is , and the coefficient of kinetic friction between each of the masses and the incline has been measured and determined to be .
 Draw free body diagrams for each of the three masses.
 Calculate the magnitude of the frictional force on each of the smaller masses in terms of the given quantities.
 Calculate the net force on the hanging mass in terms of the given quantities.
 Calculate the magnitudes of the two tension forces and in terms of the given quantities.
 Design and state a strategy for solving for how long it will take the larger mass to hit the ground, assuming at this moment it is at a height above the ground. Do not attempt to solve this: simply state the strategy for solving it.
 You build a device for lifting objects, as shown below. A rope is attached to the ceiling and two masses are allowed to hang from it. The end of the rope passes around a pulley (right) where you can pull it downward to lift the two objects upward. The angles of the ropes, measured with respect to the vertical, are shown. Assume the bodies are at rest initially.
 Suppose you are able to measure the masses and of the two hanging objects as well as the tension . Do you then have enough information to determine the other two tensions, and ? Explain your reasoning.
 If you only knew the tensions and , would you have enough information to determine the masses and ? If so, write and in terms of and . If not, what further information would you require?
 A stunt driver is approaching a cliff at very high speed. Sensors in his car have measured the acceleration and velocity of the car, as well as all forces acting on it, for various times. The driver’s motion can be broken down into the following steps: Step 1: The driver, beginning at rest, accelerates his car on a horizontal road for ten seconds. Sensors show that there is a force in the direction of motion of , but additional forces acting in the opposite direction with magnitude . The mass of the car is . Step 2: Approaching the cliff, the driver takes his foot off of the gas pedal (There is no further force in the direction of motion.) and brakes, increasing the force opposing motion from to . This continues for five seconds until he reaches the cliff. Step 3: The driver flies off the cliff, which is high and begins projectile motion.
 Ignoring air resistance, how long is the stunt driver in the air?
 For Step 1:
 Draw a free body diagram, naming all the forces on the car.
 Calculate the magnitude of the net force.
 Find the change in velocity over the stated time period.
 Make a graph of velocity in the direction vs. time over the stated time period.
 Calculate the distance the driver covered in the stated time period. Do this by finding the area under the curve in your graph of (iv). Then, check your result by using the equations for kinematics.
 Repeat (b) for Step 2.
 Calculate the distance that the stunt driver should land from the bottom of the cliff.
 You are pulling open a stuck drawer, but since you’re a physics geek you’re pulling it open with an electronic device that measures force! You measure the following behavior. The drawer has a weight of . Draw a graph of friction force vs. time.
 Draw arrows representing the forces acting on the cannonball as it flies through the air. Assume that air resistance is small compared to gravity, but not negligible.
 A tug of war erupts between you and your sweetie. Assume your mass is 60 kg and the coefficient of friction between your feet and the ground is (good shoes). Your sweetie’s mass is and the coefficient of friction between his/her feet and the ground is (socks). Who is going to win? Explain, making use of a calculation.
 A block has a little block hanging out to its side, as shown: As you know, if the situation is left like this, the little block will just fall. But if we accelerate the leftmost block to the right, this will create a normal force between the little block and the big block, and if there is a coefficient of friction between them, then the little block won’t slide down! Clever, eh?
 The mass of the little block is . What frictional force is required to keep it from falling? (State a magnitude and direction.)
 If both blocks are accelerating to the right with an acceleration , what is the normal force on the little block provided by the big block?
 What is the minimum coefficient of static friction required?
Answers to Selected Problems
 .
 .
 .
 Zero; weight of the hammer minus the air resistance.
 forces
 force
 No
 The towel’s inertia resists the acceleration
 Same distance
 You go farther
 Same amount of force
 .
 .
 .
 .
 Left picture: , right picture:
 The rope will not break because his weight of is distributed between the two ropes.
 Yes, because his weight of is greater than what the rope can hold.
 Mass is and weight is
 While accelerating down
 b. c. d. e. Eraser would slip down the wall

 Friction between the tires and the ground
 Fuel, engine, or equal and opposite reaction
 b. c. no, the box is flat so the normal force doesn’t change d. e. f. no g. h. i. j. k.
 .
 zero
 b.
c. Ma d. and e. Solve by using and substituting for
 Yes, because it is static and you know the angle and
 Yes, and the angle gives you and the angle and gives you and
 a. seconds d.
 .
 .
 .
 a.