A big electric bill
Production of NaOH is an important industrial process. Three different methods are employed, all of which involve the use of electricity. When calculating the price of sodium hydroxide a company has to charge in order to make a profit, the cost of electricity has to be factored in. To make a metric ton of NaOH, between 3300-5000 kWh (kilowatt hours) are required. Compare that with the power needed to run an average house. You could power a home for 6-10 months with the same amount of electricity.
Electrolysis of Molten Sodium Chloride
Molten (liquid) sodium chloride can be electrolyzed to produce sodium metal and chlorine gas. The electrolytic cell used in the process is called a Down’s cell (see Figure below ).
A Down’s cell is used for the electrolysis of molten sodium chloride.
In a Down’s cell, the liquid sodium ions are reduced at the cathode to liquid sodium metal. At the anode, liquid chloride ions are oxidized to chlorine gas. The reactions and cell potentials are shown below:
The battery must supply over 4 volts to carry out this electrolysis. This reaction is a major source of production of chlorine gas and is the only way to obtain pure sodium metal. Chlorine gas is widely used in cleaning, disinfecting, and in swimming pools.
Electrolysis of Aqueous Sodium Chloride
It may be logical to assume that the electrolysis of aqueous sodium chloride, called brine , would yield the same result through the same reactions as the process in molten NaCl. However, the reduction reaction that occurs at the cathode does not produce sodium metal because the water is reduced instead. This is because the reduction potential for water is only -0.83 V compared to -2.71 V for the reduction of sodium ions. This makes the reduction of water preferable because its reduction potential is less negative. Chlorine gas is still produced at the anode, just as in the electrolysis of molten NaCl.
- The reactions involving the electrolysis of molten NaCl are described.
- The reactions involving the electrolysis of brine are described.
Read the material at the link below and answer the following questions:
- How is sodium removed from the cell?
- Why is CaCl 2 added to the system?
- Why doesn’t metallic calcium contaminate the sodium production?
- What are the products of the electrolysis of molten NaCl?
- What are the products of the electrolysis of aqueous NaCl?
- What spectator ion is not shown in the overall equation for the electrolysis of aqueous NaCl?