<meta http-equiv="refresh" content="1; url=/nojavascript/">
Dismiss
Skip Navigation

Dilation

Larger or smaller version of a figure that preserves its shape.

%
Progress
Practice Dilation
Practice
Progress
%
Practice Now
Dilation

What if you enlarged or reduced a triangle without changing its shape? How could you find the scale factor by which the triangle was stretched or shrunk? After completing this Concept, you'll be able to use the corresponding sides of dilated figures to solve problems like this one.

Watch This

CK-12 Foundation: Chapter7DilationA

Learn more about dilations by watching the video at this link.

Guidance

A transformation is an operation that moves, flips, or changes a figure to create a new figure. Transformations that preserve size are rigid and ones that do not are non-rigid. A dilation makes a figure larger or smaller, but has the same shape as the original. In other words, the dilation is similar to the original. All dilations have a center and a scale factor. The center is the point of reference for the dilation (like the vanishing point in a perspective drawing) and scale factor tells us how much the figure stretches or shrinks. A scale factor is typically labeled k and is always greater than zero. Also, if the original figure is labeled \triangle ABC , for example, the dilation would be \triangle A'B'C' . The ‘ indicates that it is a copy. This tic mark is said “prime,” so A' is read “A prime.” A second dilation would be A'' , read “A double-prime.”

If the dilated image is smaller than the original, then the scale factor is 0 < k < 1 .

If the dilated image is larger than the original, then the scale factor is k > 1 .

Example A

The center of dilation is P and the scale factor is 3. Find Q' .

If the scale factor is 3 and Q is 6 units away from P , then Q' is going to be 6 \times 3 = 18 units away from P . Because we are only dilating apoint, the dilation will be collinear with the original and center.

Example B

Using the picture above, change the scale factor to \frac{1}{3} . Find Q'' .

Now the scale factor is \frac{1}{3} , so Q'' is going to be \frac{1}{3} the distance away from P as Q is. In other words, Q'' is going to be 6 \times \frac{1}{3} = 2 units away from P . Q'' will also be collinear with Q and center.

Example C

KLMN is a rectangle with length 12 and width 8. If the center of dilation is K with a scale factor of 2, draw K'L'M'N' .

If K is the center of dilation, then K and K' will be the same point. From there, L' will be 8 units above L and N' will be 12 units to the right of N .

Watch this video for help with the Examples above.

CK-12 Foundation: Chapter7DilationB

Guided Practice

1. Find the perimeters of KLMN and K'L'M'N' . Compare this ratio to the scale factor.

2. \triangle ABC is a dilation of \triangle DEF . If P is the center of dilation, what is the scale factor?

3. Find the scale factor, given the corresponding sides. In the diagram, the black figure is the original and P is the center of dilation.

Answers:

1. The perimeter of KLMN = 12 + 8 + 12 + 8 = 40 . The perimeter of K'L'M'N'  = 24 + 16 + 24 + 16 = 80 . The ratio is 80:40, which reduces to 2:1, which is the same as the scale factor.

2. Because \triangle ABC is a dilation of \triangle DEF , then \triangle ABC \sim \triangle DEF . The scale factor is the ratio of the sides. Since \triangle ABC is smaller than the original, \triangle DEF , the scale factor is going to be less than one, \frac{12}{20} = \frac{3}{5} .

If \triangle DEF was the dilated image, the scale factor would have been \frac{5}{3} .

3. Since the dilation is smaller than the original, the scale factor is going to be less than one. \frac{8}{20}=\frac{2}{5}

Explore More

In the two questions below, you are told the scale factor. Determine the dimensions of the dilation. In each diagram, the black figure is the original and P is the center of dilation.

  1. k = 4
  2. k = \frac{1}{3}

In the question below, find the scale factor, given the corresponding sides. In the diagram, the black figure is the original and P is the center of dilation.

  1. Find the perimeter of both triangles in #1. What is the ratio of the perimeters?
  2. Writing What happens if k = 1 ?

Construction We can use a compass and straight edge to construct a dilation as well. Copy the diagram below.

  1. Set your compass to be CG and use this setting to mark off a point 3 times as far from C as G is. Label this point G' . Repeat this process for CO and CD to find O' and D' .
  2. Connect G', O' and D' to make \triangle D'O'G' . Find the ratios, \frac{D'O'}{DO}, \frac{O'G'}{OG} and \frac{G'D'}{GD} .
  3. What is the scale factor of this dilation?
  4. Describe how you would dilate the figure by a scale factor of 4.
  5. Describe how you would dilate the figure by a scale factor of \frac{1}{2} .
  1. The scale factor between two shapes is 1.5. What is the ratio of their perimeters?
  2. The scale factor between two shapes is 1.5. What is the ratio of their areas? Hint: Draw an example and calculate what happens.
  3. Suppose you dilate a triangle with side lengths 3, 7, and 9 by a scale factor of 3. What are the side lengths of the image?
  4. Suppose you dilate a rectangle with a width of 10 and a length of 12 by a scale factor of \frac{1}{2} . What are the dimensions of the image?
  5. Find the areas of the rectangles in #14. What is the ratio of their areas?

Vocabulary

Dilation

Dilation

To reduce or enlarge a figure according to a scale factor is a dilation.
Quadrilateral

Quadrilateral

A quadrilateral is a closed figure with four sides and four vertices.
Ratio

Ratio

A ratio is a comparison of two quantities that can be written in fraction form, with a colon or with the word “to”.
Scale Factor

Scale Factor

A scale factor is a ratio of the scale to the original or actual dimension written in simplest form.
Transformation

Transformation

A transformation moves a figure in some way on the coordinate plane.
Vertex

Vertex

A vertex is a point of intersection of the lines or rays that form an angle.
Rigid Transformation

Rigid Transformation

A rigid transformation is a transformation that preserves distance and angles, it does not change the size or shape of the figure.

Image Attributions

Explore More

Sign in to explore more, including practice questions and solutions for Dilation.

Reviews

Please wait...
Please wait...

Original text