Scientists today use computers to aid with many complex mathematical operations used in science. Computers take and store measurement readings and can save hours, days, or even years of mathematical calculations. The image is of the CSIRAC (Council for Scientific and Industrial Research Automatic Computer), Australia's first digital computer, first run in November 1949. A modern laptop has more computing power than this roomfilling computer did.
Mathematics Tool Kit
What Is the Place of Mathematics in Physics?
There is certainly a lot of math in physics, but the concepts and theories of physics cannot be derived from only mathematics. If you wish to build a complex mechanical structure, it is pointless to begin without wrenches and screwdrivers. To build mechanical structures, you must have tools. One of the primary tools for working in physics is mathematics. This particular physics resource requires algebra, geometry, and trigonometry, but higherlevel physics courses also require calculus. In fact, calculus was invented by Isaac Newton specifically to solve physics problems; most advanced calculus problems are actually physics problems.
Scientific Notation
In the "Definition of Physics," it was noted that physics deals with objects as small as subatomic particles and as large as galaxies. It should be clear that physicists deal with extremely small numbers  like the mass of a lead atom: 0.00000000000000000000034 g  and extremely large numbers  like the distance from our galaxy to the Andromeda galaxy: 2.5 million light years, which is approximately 25,000,000,000,000,000,000 km!
These numbers are difficult to write and even more difficult to calculate with. It is much more convenient to write and calculate with such extreme numbers if they are written in scientific notation . In scientific notation, the mass of a lead atom is 3.4 × 10 ^{ 34 } g, and the distance from our galaxy to the Andromeda galaxy is 2.5 × 10 ^{ 19 } km.
A number is expressed in scientific notation by moving the decimal so that exactly one nonzero digit is on the left of the decimal and the exponent of 10 will be the number of places the decimal was moved. If the decimal is moved to the left, the exponent is positive and if the decimal was moved to the right, the exponent is negative. All significant figures are maintained in scientific notation. Significant figures are explained below.
Example: Express 13,700,000,000 in scientific notation.
Solution: Since the decimal will be moved to the left 10 places, the exponent will be 10. So, the correct notation is 1.37 × 10 ^{ 10 } .
Example: Express 0.000000000000000074 in scientific notation.
Solution: Since the decimal will be moved to the right 17 places, the exponent will be 17. So the correct scientific notation is 7.4 × 10 ^{ 17 } .
Example: Express the number 8.43 × 10 ^{ 5 } in expanded form.
Solution: 10 ^{ 5 } is 100,000 so 8.43 × 10 ^{ 5 } is 8.43 × 100,000 or 843,000.
Operations with Exponential Numbers
In order to add or subtract numbers in scientific notation, the exponents must be the same. If the exponents are not the same, one of the numbers must be changed so that the exponents are the same. Once the exponents are the same, the numbers are added and the same exponents are carried through to the answer.
Example: Add 5.0 × 10 ^{ 5 } and 4.0 × 10 ^{ 4 } .
Solution: In order to add these numbers, we can change 4.0 × 10 ^{ 4 } to 0.40 × 10 ^{ 5 } and then add 0.40 × 10 ^{ 5 } to 5.0 × 10 ^{ 5 } which yields 5.4 × 10 ^{ 5 } .
When you multiply exponential numbers, the numbers multiply and the exponents add.
Example: Multiply 5.0 × 10 ^{ 5 } and 4.0 × 10 ^{ 4 } .
Solution:
Example: Multiply 6.0 × 10 ^{ 3 } and 2.0 × 10 ^{ 5 } .
Solution:
When you divide exponential numbers, the numbers are divided and the exponent of the divisor is subtracted from the exponent of the dividend.
Example: Divide 6.0 × 10 ^{ 3 } by 2.0 × 10 ^{ 5 } .
Solution:
Significant Figures
The numbers you use in math class are considered to be exact numbers. These numbers are defined, not measured. Measured numbers cannot be exact  the specificity with which we can make a measurement depends on how precise our measuring instrument is. In the case of measurements, we can only read our measuring instruments to a limited number of subdivisions. We are limited by our ability to see smaller and smaller subdivisions, and we are limited by our ability to construct smaller and smaller subdivisions on our measuring devices. Even with the use of powerful microscopes to construct and read our measuring devices, we eventually reach a limit. Therefore, although the actual measurement of an object may be a perfect 12 inches, we cannot prove it to be so. Measurements do not produce perfect numbers; the only perfect numbers in science are defined numbers, such as conversion factors.
It is very important to recognize and report the limitations of a measurement along with the magnitude and unit of the measurement. Many times, the measurements made in an experiment are analyzed for regularities. Since the reported numbers show the limits of the measurements (how specific these measurements really are), it is possible to determine how regular these measurements are.
Consider the Table below of the pressures (P) and volumes (V) of a gas sample and the calculated PV product.
Pressure  Volume  Pressure × Volume (P × V) 
4.01 atm  6.03 L  24.1803 Latm 
3.02 atm  7.99 L  24.1298 Latm 
6.04 atm  3.98 L  24.0392 Latm 
11.98 atm  1.99 L  23.8402 Latm 
Now, in the Table below , look at this same set of data when we are told that all the measurements have only two significant figures and all the numbers must be rounded to two places.
Pressure  Volume  Pressure × Volume (P × V) 
4.0 atm 
6.0 L  24 Latm 
3.0 atm  8.0 L  24 Latm 
6.0 atm  4.0 L  24 Latm 
12 atm  2.0 L  24 Latm 
When the numbers are expressed with proper number of significant figures, a regularity appears that was not apparent before.
Rules for Determining Significant Figures
Significant figures are all of the digits that can be known with certainty in a measurement plus an estimated last digit. Significant figures provide a system to keep track of the limits of the original measurement. To record a measurement, you must write down all the digits actually measured, including measurements of zero, and you must not write down any digit not measured. The only real difficulty with this system is that zeros are sometimes used as measured digits, while other times they are used to locate the decimal point.
In the sketch shown above, the correct measurement is greater than 1.2 inches but less than 1.3 inches. It is proper to estimate one place beyond the calibrations of the measuring instrument. This ruler is calibrated to 0.1 inches, so we can estimate the hundredths place. This reading should be reported as 1.25 or 1.26 inches.
In this second case (sketch above), it is apparent that the object is, as nearly as we can read, 1 inch. Since we know the tenths place is zero and can estimate the hundredths place to be zero, the measurement should be reported as 1.00 inch. It is vital that you include the zeros in your reported measurement because these are measured places and are significant figures.
This measurement is read as 1.15 or 1.16 inches.
This measurement is read as 1.50 inches.
In all of these examples, the measurements indicate that the measuring instrument had subdivisions of a tenth of an inch and that the hundredths place is estimated. There is some uncertainty about the last, and only the last, digit.
In our system of writing measurements to show significant figures, we must distinguish between measured zeros and placeholding zeros. Here are the rules for determining the number of significant figures in a measurement.
Rules for Determining the Number of Significant Figures:
 All nonzero digits are significant.
 All zeros between nonzero digits are significant.
 All beginning zeros are not significant.
 Ending zeros are significant if the decimal point is written in but not significant if the decimal point is an understood decimal (the decimal point is not written in).
Examples of the Significant Figure Rules:
1. All nonzero digits are significant.
543 has 3 significant figures.
22.437 has 5 significant figures.
1.321754 has 7 significant figures.
2. All zeros between nonzero digits are significant.
7,004 has 4 significant figures.
10.3002 has 6 significant figures.
103 has 3 significant figures.
3. All beginning zeros are not significant.
0.00000075 has 2 significant figures.
0.02 has 1 significant figure.
0.003003 has 4 significant figures.
4. Ending zeros are significant if the decimal point is actually written in but not significant if the decimal point is an understood decimal.
37.300 has 5 significant figures.
33.00000 has 7 significant figures.
100. has 3 significant figures.
100 has 1 significant figure.
302,000 has 3 significant figures.
1,050 has 3 significant figures.
Addition and Subtraction
The answer to an addition or subtraction operation must not have any digits further to the right than the shortest addend. In other words, the answer should have as many decimal places as the addend with the smallest number of decimal places.
Example:
Notice that the top addend has a 3 in the last column on the right, but neither of the other two addends have a number in that column. In elementary math classes, you were taught that these blank spaces can be filled in with zeros and the answer would be 17.6163 cm. In the sciences, however, these blank spaces are unknown numbers, not zeros. Since they are unknown numbers, you cannot substitute any numbers into the blank spaces. As a result, you cannot know the sum of adding (or subtracting) any column of numbers that contain an unknown number. When you add the columns of numbers in the example above, you can only be certain of the sums for the columns with known numbers in each space in the column. In science, the process is to add the numbers in the normal mathematical process and then round off all columns that contain an unknown number (a blank space). Therefore, the correct answer for the example above is 17.62 cm and has only four significant figures.
Multiplication and Division
The answer for a multiplication or division operation must have the same number of significant figures as the factor with the least number of significant figures.
Example:
The factor 3.556 cm has four significant figures, and the factor 2.4 cm has two significant figures. Therefore the answer must have two significant figures. The mathematical answer of 8.5344 cm ^{ 2 } must be rounded back to 8.5 cm ^{ 2 } in order for the answer to have two significant figures.
Example:
The factor 20.0 cm has three significant figures, and the factor 5.0000 cm has five significant figures. The answer must be rounded to three significant figures. Therefore, the decimal must be written in to show that the two ending zeros are significant. If the decimal is omitted (left as an understood decimal), the two zeros will not be significant and the answer will be wrong.
Example:
In this case, the answer must be rounded back to two significant figures. We cannot have a decimal after the zero in 120 cm ^{ 2 } because that would indicate the zero is significant, whereas this answer must have exactly two significant figures.
Summary
 Mathematics is a major tool for doing physics.
 The very large and very small measurements in physics make it useful to express numbers in scientific notation.
 There is uncertainty in all measurements.
 The use of significant figures is one way to keep track of uncertainty.
 Measurements must be written with the proper number of significant figures and the results of calculations must show the proper number of significant figures.

Rules for Determining the Number of Significant Figures:
 All nonzero digits are significant.
 All zeros between nonzero digits are significant.
 All beginning zeros are not significant.
 Ending zeros are significant if the decimal point is actually written in but not significant if the decimal point is an understood decimal (the decimal point is not written in).
Practice
Questions
This resource is very helpful in explaining units, scientific notation, and significant figures. Use it to answer the questions below:
https://www.youtube.com/watch?v=hQpQ0hxVNTg
 How many base units are there?
 Why do we want the hours on top in the first conversion factor?
 What do measured numbers tell you?
 What is the purpose of significant figures?
Review
Questions

Write the following numbers in proper scientific notation.
 3,120
 0.00000341

Write the following numbers in expanded form.
 4.35 × 10 ^{ 6 }
 6.1 × 10 ^{ 4 }

How many significant figures are in the following numbers?
 2.3
 17.95
 9.89 × 10 ^{ 3 }
 170
 1.02

Perform the following calculations and give your answer with the correct number of significant figures:
 10.5 + 11.62
 0.01223 + 1.01
 19.85 − 0.0113

Perform the following calculations and give your answer with the correct number of significant figures:
 0.1886 × 12
 2.995 ÷ 0.16685
 910 × 0.18945