<meta http-equiv="refresh" content="1; url=/nojavascript/"> Resistors in Parallel ( Read ) | Physics | CK-12 Foundation
Dismiss
Skip Navigation
You are viewing an older version of this Concept. Go to the latest version.

Resistors in Parallel

%
Best Score
Practice Resistors in Parallel
Practice
Best Score
%
Practice Now
Resistors in Parallel
 0  0  0

Students will learn how to analyze and solve problems involving circuits with resistors in parallel.

Key Equations

\frac{1} {R_{total}} = \frac{1} {R_1} + \frac{1}{R_2} + \frac{1} {R_3} + \ldots

Guidance

Resistors in Parallel: All resistors are connected together at both ends. There are many rivers (i.e. The main river branches off into many other rivers), so all resistors receive different amounts of current. But since they are all connected to the same point at both ends they all receive the same voltage.

Example 1

A circuit is wired up with 2 resistors in parallel.

Both resistors are directly connected to the power supply, so both have the same 20V across them. But they are on different ‘rivers’ so they have different current flowing through them. Lets go through the same questions and answers as with the circuit in series.

Question: What is the total resistance of the circuit?

Answer: The total resistance is \frac{1}{R_{total}}=\frac{1}{R_1}+\frac{1}{R_2}=\frac{1}{90\Omega}+\frac{1}{10\Omega}=\frac{1}{90\Omega}+\frac{9}{90\Omega}=\frac{10}{90\Omega} thus, R_{total}=\frac{90\Omega}{10}=9\Omega

^* Note: Total resistance for a circuit in parallel will always be smaller than smallest resistor in the circuit.

Question: What is the total current coming out of the power supply?

Answer: Use Ohm’s Law (V=IR) but solve for current (I=V/R) .

I_{total}=\frac{V_{total}}{R_{total}}=\frac{20V}{9\Omega}=2.2A

Question: How much power does the power supply dissipate?

Answer: P=IV , so the total power equals the total voltage multiplied by the total current. Thus, P_{total}=I_{total}V_{total}=(2.2A)(20V)=44.4W . So the Power Supply outputs 44W (i.e. 44 Joules of energy per second).

Question: How much power is each resistor dissipating?

Answer: Each resistor has different current across it, but the same voltage. So, using Ohm’s law, convert the power formula into a form that does not depend on current. P=IV=\left(\frac{V}{R}\right) V=\frac{V^2}{R} Substituted I=V/R into the power formula. P_{90\Omega}=\frac{V^2_{90\Omega}}{R_{90\Omega}}=\frac{(20V)^2}{90\Omega}=4.4W; P_{10\Omega}=\frac{V^2_{10\Omega}}{R_{10}\Omega}=\frac{(20V)^2}{10\Omega}=40W

^* Note: If you add up the power dissipated by each resistor, it equals the total power outputted, as it should–Energy is always conserved.

Question: How much current is flowing through each resistor?

Answer: Use Ohm’s law to calculate the current for each resistor.

I_{90\Omega}=\frac{V_{90\Omega}}{R_{90\Omega}}=\frac{20V}{90\Omega}=0.22A \qquad I_{10\Omega}=\frac{V_{10\Omega}}{R_{10\Omega}}=\frac{20V}{10\Omega}=2.0A

Notice that the 10\Omega resistor has the most current going through it. It has the least resistance to electricity so this makes sense.

^* Note: If you add up the currents of the individual ‘rivers’ you get the total current of the of the circuit, as you should.

Watch this Explanation

Simulation

Time for Practice

  1. Three 82\ \Omega resistors and one 12\ \Omega resistor are wired in parallel with a 9\;\mathrm{V} battery.
    1. Draw the schematic diagram.
    2. What is the total resistance of the circuit?
  2. What does the ammeter read and which resistor is dissipating the most power?
  3. Given three resistors, 200\ \Omega, 300\ \Omega and 600\ \Omega and a 120\;\mathrm{V} power source connect them in a way to heat a container of water as rapidly as possible.
    1. Show the circuit diagram
    2. How many joules of heat are developed after 5 minutes?

Answers to Selected Problems

  1. b. 8.3 \;\mathrm{W}
  2. 0.8\mathrm{A} and the 50 \ \Omega on the left
  3. part 2 43200\mathrm{J} .

Image Attributions

Reviews

Email Verified
Well done! You've successfully verified the email address .
OK
Please wait...
Please wait...

Original text